Skip to content

Highland Fire and EMS Frequencies

We do not have frequencies listed specifically for Highland in Brule County, South Dakota yet. Countywide channels for Brule County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Stickney (South Dakota State Radio System), about 22 miles away.

About Highland Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Highland: Brule County Fire 155.8200 MHz, FM, 156.7 PL. Trunked: South Dakota State Radio System, for example Brule County Fire talkgroup 1127 (hex 467).

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: South Dakota State Radio System: 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Highland, start with the Stickney site of South Dakota State Radio System, about 22 miles away. Its control channels: 155.55, 157.47, 159.045 MHz.

Data updated .

Brule County channels that also cover Highland

Fire Dispatch

Fire Dispatch frequencies for Brule County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Brule County FireSheriff, Fire, EMS – Chamberlain155.8200
In 153.9350
156.7 PLFMWNVX751
Brule County FireSheriff, Fire, EMS – Kimball155.8200
In 153.9350
103.5 PLFMWNVX751

South Dakota State Radio System

South Dakota State Radio System talkgroups
AgencyDescriptionTalkgroupHexMode
Brule County FireBrule County Fire – Fire Ground1127467D
Brule County EMSBrule County EMS – Tactical Channel1128468D

Nearest trunked radio sites

Distances are measured from the center of Highland.

Stickney · South Dakota State Radio System
RFSS 1 · Site 33 (hex 21) · NAC 470 · about 22 mi away
Control 155.55, 157.47, 159.045
Voice 159.39
Iona · South Dakota State Radio System
RFSS 1 · Site 2 (hex 2) · NAC 470 · about 26 mi away
Control 156.015, 159.06, 159.285
Voice 159.69
Reliance (Medicine Butte) · South Dakota State Radio System
RFSS 1 · Site 58 (hex 3A) · NAC 470 · about 39 mi away
Control 155.655, 156.03
Voice 155.85, 159.165
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Highland?

We do not have a fire dispatch channel listed specifically for Highland. The county-level fire dispatch channels in the same county: Brule County Fire 155.8200 MHz, FM, 156.7 PL.

Do fire departments and EMS use a trunked radio system in Highland?

Yes. The county-level systems that cover Highland are Fire and EMS talkgroups are listed for South Dakota State Radio System: 2 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Highland?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Highland?

For Highland, start with the Stickney site of South Dakota State Radio System. Its control channels are 155.55, 157.47, 159.045 MHz. Program a control channel first; the scanner finds the voice channels from it.