Skip to content

Hamilton Fire and EMS Frequencies

We do not have frequencies listed specifically for Hamilton in Charles Mix County, South Dakota yet. Countywide channels for Charles Mix County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Stickney (South Dakota State Radio System), about 27 miles away.

About Hamilton Fire and EMS Frequencies

Quick answer: Trunked: South Dakota State Radio System, for example Charles Mix County Fire talkgroup 363 (hex 16b).

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: South Dakota State Radio System: 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Hamilton, start with the Stickney site of South Dakota State Radio System, about 27 miles away. Its control channels: 155.55, 157.47, 159.045 MHz.

Data updated .

Charles Mix County channels that also cover Hamilton

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Charles Mix County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Charles Mix County FireWagner Fire154.2200FMNWQOX712

South Dakota State Radio System

South Dakota State Radio System talkgroups
AgencyDescriptionTalkgroupHexMode
Charles Mix County FirePlatte Volunteer Fire Department36316bD

Nearest trunked radio sites

Distances are measured from the center of Hamilton.

Stickney · South Dakota State Radio System
RFSS 1 · Site 33 (hex 21) · NAC 470 · about 27 mi away
Control 155.55, 157.47, 159.045
Voice 159.39
Iona · South Dakota State Radio System
RFSS 1 · Site 2 (hex 2) · NAC 470 · about 27 mi away
Control 156.015, 159.06, 159.285
Voice 159.69
Lake Andes (Radar Hill) · South Dakota State Radio System
RFSS 1 · Site 36 (hex 24) · about 30 mi away
Control 157.8, 157.92
Voice 158.04, 158.61
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

Do fire departments and EMS use a trunked radio system in Hamilton?

Yes. The county-level systems that cover Hamilton are Fire and EMS talkgroups are listed for South Dakota State Radio System: 1 talkgroup. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Hamilton?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Hamilton?

For Hamilton, start with the Stickney site of South Dakota State Radio System. Its control channels are 155.55, 157.47, 159.045 MHz. Program a control channel first; the scanner finds the voice channels from it.