Skip to content

Logan Fire and EMS Frequencies

We do not have frequencies listed specifically for Logan in Clark County, South Dakota yet. Countywide channels for Clark County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Crandall (South Dakota State Radio System), about 24 miles away.

About Logan Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Logan: Clark County Fire 154.1450 MHz, FM, 203.5 PL. County-level ems dispatch that covers Logan: Clark County EMS 158.8500 MHz, FM, 127.3 PL. Trunked: South Dakota State Radio System, for example Clark County EMS talkgroup 1526 (hex 5f6).

  • 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: South Dakota State Radio System: 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Logan, start with the Crandall site of South Dakota State Radio System, about 24 miles away. Its control channels: 156.24, 159.15, 160.14 MHz.

Data updated .

Clark County channels that also cover Logan

Fire Dispatch

Fire Dispatch frequencies for Clark County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Clark County FireClark City Fire154.1450
In 153.7700
203.5 PLFMWSHN857

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Clark County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Clark County FireWillow Lake Fire154.2050FMWQGM873
Clark County FireBradley Fire155.1300
In 158.9100
FMWQGV821

EMS Dispatch

EMS Dispatch frequencies for Clark County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Clark County EMSCounty EMS158.8500
In 153.9800
127.3 PLFMWNZN634

South Dakota State Radio System

South Dakota State Radio System talkgroups
AgencyDescriptionTalkgroupHexMode
Clark County EMSClark County EMS – Dispatch15265f6D

Nearest trunked radio sites

Distances are measured from the center of Logan.

Crandall · South Dakota State Radio System
RFSS 1 · Site 21 (hex 15) · NAC 475 · about 24 mi away
Control 156.24, 159.15, 160.14
Voice 159.69
De Smet · South Dakota State Radio System
RFSS 1 · Site 8 (hex 8) · NAC 478 · about 27 mi away
Control 159.015, 159.33, 159.885
Voice 160.2
Redfield · South Dakota State Radio System
RFSS 1 · Site 60 (hex 3C) · about 30 mi away
Control 155.415
Voice 156.12, 159.69
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Logan?

We do not have a fire dispatch channel listed specifically for Logan. The county-level fire dispatch channels in the same county: Clark County Fire 154.1450 MHz, FM, 203.5 PL.

What frequency does EMS or the ambulance service use in Logan?

We do not have a EMS dispatch channel listed specifically for Logan. The county-level EMS dispatch channels in the same county: Clark County EMS 158.8500 MHz, FM, 127.3 PL.

Do fire departments and EMS use a trunked radio system in Logan?

Yes. The county-level systems that cover Logan are Fire and EMS talkgroups are listed for South Dakota State Radio System: 1 talkgroup. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Logan?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Logan?

For Logan, start with the Crandall site of South Dakota State Radio System. Its control channels are 156.24, 159.15, 160.14 MHz. Program a control channel first; the scanner finds the voice channels from it.