Skip to content

Glenwood Fire and EMS Frequencies

We do not have frequencies listed specifically for Glenwood in Clay County, South Dakota yet. Countywide channels for Clay County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Beresford (South Dakota State Radio System), about 4 miles away.

About Glenwood Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Glenwood: Clay County Fire 155.9400 MHz, FM, 173.8 PL. Trunked: South Dakota State Radio System, for example Clay County Fire talkgroup 1356 (hex 54c).

  • 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: South Dakota State Radio System: 4 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Glenwood, start with the Beresford site of South Dakota State Radio System, about 4 miles away. Its control channels: 157.325, 159.465 MHz.

Data updated .

Clay County channels that also cover Glenwood

Fire Dispatch

Fire Dispatch frequencies for Clay County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Clay County FireVermillion Fire-EMS-City Dispatch155.9400
In 154.9950
173.8 PLFMKRI494

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Clay County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Clay County FireWakonda Fire-EMS154.2350
In 150.8050
123.0 PLFMWPMK709
Clay County FireVermillion Fire-EMS Tactical154.8150
In 158.7900
88.5 PLFMWPGA948
Clay County FireIrene Fire-EMS155.0850173.8 PLFMWPRF840

South Dakota State Radio System

South Dakota State Radio System talkgroups
AgencyDescriptionTalkgroupHexMode
Clay County FireClay County Fire – Dispatch135654cD
Clay County FireClay County Fire – Alternate135754dD
Clay County EMSClay Co EMS135954fD
Clay County HospitalDakota Hospital1361551D

Nearest trunked radio sites

Distances are measured from the center of Glenwood.

Beresford · South Dakota State Radio System
RFSS 1 · Site 52 (hex 34) · NAC 471 · about 4 mi away
Control 157.325, 159.465
Voice 157.785, 158.175
Vermillion · South Dakota State Radio System
RFSS 1 · Site 35 (hex 23) · NAC 473 · about 18 mi away
Control 157.2, 159.285
Voice 157.2875, 157.3875
Turkey Ridge · South Dakota State Radio System
RFSS 1 · Site 15 (hex F) · NAC 47F · about 30 mi away
Control 157.95, 159.375, 159.945
Voice 157.83
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Glenwood?

We do not have a fire dispatch channel listed specifically for Glenwood. The county-level fire dispatch channels in the same county: Clay County Fire 155.9400 MHz, FM, 173.8 PL.

Do fire departments and EMS use a trunked radio system in Glenwood?

Yes. The county-level systems that cover Glenwood are Fire and EMS talkgroups are listed for South Dakota State Radio System: 4 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Glenwood?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Glenwood?

For Glenwood, start with the Beresford site of South Dakota State Radio System. Its control channels are 157.325, 159.465 MHz. Program a control channel first; the scanner finds the voice channels from it.