About Belle Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Belle: Edmunds County Fire 154.1300 MHz, narrow FM, CSQ. Trunked: South Dakota State Radio System, for example Edmunds County EMS talkgroup 1053 (hex 41d).
- 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: South Dakota State Radio System: 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Belle, start with the Leola site of South Dakota State Radio System, about 12 miles away. Its control channels: 157.77, 157.86, 158.61 MHz.
Data updated .
Edmunds County channels that also cover Belle
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Edmunds County Fire | Roscoe Fire | 154.1300 | CSQ | FMN | — |
| Edmunds County Fire | Roscoe Fire | 154.1750 | CSQ | FMN | — |
| Edmunds County Fire | Ipswich Fire | 154.2500 In 150.8050 | 627 DPL | FMN | WQKX582 |
| Edmunds County Fire | Bowdle Fire | 154.9950 In 158.9400 | 162.2 PL | FMN | WQPL216 |
South Dakota State Radio System
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Edmunds County EMS | Edmunds County EMS – Dispatch | 1053 | 41d | D |
Nearest trunked radio sites
Distances are measured from the center of Belle.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Belle?
We do not have a fire dispatch channel listed specifically for Belle. The county-level fire dispatch channels in the same county: Edmunds County Fire 154.1300 MHz, narrow FM, CSQ.
Do fire departments and EMS use a trunked radio system in Belle?
Yes. The county-level systems that cover Belle are Fire and EMS talkgroups are listed for South Dakota State Radio System: 1 talkgroup. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Belle?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Belle?
For Belle, start with the Leola site of South Dakota State Radio System. Its control channels are 157.77, 157.86, 158.61 MHz. Program a control channel first; the scanner finds the voice channels from it.