Skip to content

Emerson Fire and EMS Frequencies

We do not have frequencies listed specifically for Emerson in Faulk County, South Dakota yet. Countywide channels for Faulk County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Orient Hills (South Dakota State Radio System), about 21 miles away.

About Emerson Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Emerson: Faulk County Fire 154.3550 MHz, FM, 141.3 PL. County-level ems dispatch that covers Emerson: Faulk County EMS 154.3550 MHz, FM, 151.4 PL. Trunked: South Dakota State Radio System, for example Faulk County Fire talkgroup 1204 (hex 4b4).

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: South Dakota State Radio System: 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Emerson, start with the Orient Hills site of South Dakota State Radio System, about 21 miles away. Its control channels: 158.49, 158.64 MHz.

Data updated .

Faulk County channels that also cover Emerson

Fire Dispatch

Fire Dispatch frequencies for Faulk County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Faulk County FireFaulk County Fire – Dispatch154.3550
In 158.9700
141.3 PLFMWQBK457

EMS Dispatch

EMS Dispatch frequencies for Faulk County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Faulk County EMSFaulk County EMS – Dispatch154.3550
In 158.9700
151.4 PLFMWQBK457

South Dakota State Radio System

South Dakota State Radio System talkgroups
AgencyDescriptionTalkgroupHexMode
Faulk County FireFaulk County Fire – Dispatch12044b4D

Nearest trunked radio sites

Distances are measured from the center of Emerson.

Orient Hills · South Dakota State Radio System
RFSS 1 · Site 47 (hex 2F) · about 21 mi away
Control 158.49, 158.64
Voice 157.83, 157.95
Aberdeen · South Dakota State Radio System
RFSS 1 · Site 1 (hex 1) · about 29 mi away
Control 156.15, 157.275, 159.375
Voice 159.225
Redfield · South Dakota State Radio System
RFSS 1 · Site 60 (hex 3C) · about 32 mi away
Control 155.415
Voice 156.12, 159.69
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Emerson?

We do not have a fire dispatch channel listed specifically for Emerson. The county-level fire dispatch channels in the same county: Faulk County Fire 154.3550 MHz, FM, 141.3 PL.

What frequency does EMS or the ambulance service use in Emerson?

We do not have a EMS dispatch channel listed specifically for Emerson. The county-level EMS dispatch channels in the same county: Faulk County EMS 154.3550 MHz, FM, 151.4 PL.

Do fire departments and EMS use a trunked radio system in Emerson?

Yes. The county-level systems that cover Emerson are Fire and EMS talkgroups are listed for South Dakota State Radio System: 1 talkgroup. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Emerson?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Emerson?

For Emerson, start with the Orient Hills site of South Dakota State Radio System. Its control channels are 158.49, 158.64 MHz. Program a control channel first; the scanner finds the voice channels from it.