About Melrose Fire and EMS Frequencies
Quick answer: Trunked: South Dakota State Radio System, for example Grant County Fire talkgroup 1088 (hex 440).
- Trunked radio systems that carry fire and EMS traffic here: South Dakota State Radio System: 3 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Melrose, start with the Summit site of South Dakota State Radio System, about 21 miles away. Its control channels: 156.015, 158.64, 159.165 MHz.
Data updated .
Grant County channels that also cover Melrose
South Dakota State Radio System
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Grant County Fire | Grant County Fire – Dispatch | 1088 | 440 | D |
| Grant County Fire | Big Stone Fire | 1092 | 444 | D |
| Grant County EMS | Grant County EMS – Dispatch | 1650 | 672 | D |
Nearest trunked radio sites
Distances are measured from the center of Melrose.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
Do fire departments and EMS use a trunked radio system in Melrose?
Yes. The county-level systems that cover Melrose are Fire and EMS talkgroups are listed for South Dakota State Radio System: 3 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Melrose?
A trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Melrose?
For Melrose, start with the Summit site of South Dakota State Radio System. Its control channels are 156.015, 158.64, 159.165, 160.05 MHz. Program a control channel first; the scanner finds the voice channels from it.