Skip to content

Florence Fire and EMS Frequencies

We do not have frequencies listed specifically for Florence in Hamlin County, South Dakota yet. Countywide channels for Hamlin County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Watertown (South Dakota State Radio System), about 13 miles away.

About Florence Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Florence: Hamlin County Fire 154.4300 MHz, FM, 118.8 PL. Trunked: South Dakota State Radio System, for example Hamlin County Fire talkgroup 1307 (hex 51b).

  • 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: South Dakota State Radio System: 3 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Florence, start with the Watertown site of South Dakota State Radio System, about 13 miles away. Its control channels: 157.89, 158.67 MHz.

Data updated .

Hamlin County channels that also cover Florence

Fire Dispatch

Fire Dispatch frequencies for Hamlin County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Hamlin County FireCounty Fire154.4300
In 153.8300
118.8 PLFMWPCI995

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Hamlin County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Hamlin County FireHazel Fire154.3250FMNWPRU674
Hamlin County FireHayti Fire154.3700FMNWPYL573

South Dakota State Radio System

South Dakota State Radio System talkgroups
AgencyDescriptionTalkgroupHexMode
Hamlin County FireHamlin County Fire – Dispatch130751bD
Hamlin County FireHamlin County Fire – Fire Ground130851cD
Hamlin County EMSHamlin County EMS – Dispatch130951dD

Nearest trunked radio sites

Distances are measured from the center of Florence.

Watertown · South Dakota State Radio System
RFSS 1 · Site 41 (hex 29) · NAC 477 · about 13 mi away
Control 157.89, 158.67
Voice 158.01, 158.52
Toronto · South Dakota State Radio System
RFSS 1 · Site 34 (hex 22) · NAC 47F · about 21 mi away
Control 157.5, 157.845, 159.975
Voice 155.685, 160.335
Brookings · South Dakota State Radio System
RFSS 1 · Site 39 (hex 27) · NAC 475 · about 27 mi away
Control 157.92, 158.04
Voice 157.8, 158.61
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Florence?

We do not have a fire dispatch channel listed specifically for Florence. The county-level fire dispatch channels in the same county: Hamlin County Fire 154.4300 MHz, FM, 118.8 PL.

Do fire departments and EMS use a trunked radio system in Florence?

Yes. The county-level systems that cover Florence are Fire and EMS talkgroups are listed for South Dakota State Radio System: 3 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Florence?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Florence?

For Florence, start with the Watertown site of South Dakota State Radio System. Its control channels are 157.89, 158.67 MHz. Program a control channel first; the scanner finds the voice channels from it.