About Rose Hill Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Rose Hill: Hand County Fire 460.7000 MHz, narrow FM, 146.2 PL. Trunked: South Dakota State Radio System, for example Hand County Fire talkgroup 1430 (hex 596).
- 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: South Dakota State Radio System: 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Rose Hill, start with the Miller site of South Dakota State Radio System, about 15 miles away. Its control channels: 155.58, 159.27 MHz.
Data updated .
Hand County channels that also cover Rose Hill
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Hand County Fire | Hand County Fire – South repeater | 460.7000 In 465.7000 | 146.2 PL | FMN | WPGS205 |
| Hand County Fire | Orient-Polo Fire | 461.6000 In 466.6000 | 88.5 PL | FMN | WQFY895 |
| Hand County Fire | Wessington Fire & EMS | 463.4000 In 468.4000 | 664 DPL | FMN | WPDV377 |
South Dakota State Radio System
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Hand County Fire | Hand County Fire – Dispatch | 1430 | 596 | D |
Nearest trunked radio sites
Distances are measured from the center of Rose Hill.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Rose Hill?
We do not have a fire dispatch channel listed specifically for Rose Hill. The county-level fire dispatch channels in the same county: Hand County Fire 460.7000 MHz, narrow FM, 146.2 PL.
Do fire departments and EMS use a trunked radio system in Rose Hill?
Yes. The county-level systems that cover Rose Hill are Fire and EMS talkgroups are listed for South Dakota State Radio System: 1 talkgroup. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Rose Hill?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Rose Hill?
For Rose Hill, start with the Miller site of South Dakota State Radio System. Its control channels are 155.58, 159.27 MHz. Program a control channel first; the scanner finds the voice channels from it.