About Stephan Fire and EMS Frequencies
Quick answer: Trunked: South Dakota State Radio System, for example Hyde County Fire talkgroup 1262 (hex 4ee).
- Trunked radio systems that carry fire and EMS traffic here: South Dakota State Radio System: 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Stephan, start with the Miller site of South Dakota State Radio System, about 20 miles away. Its control channels: 155.58, 159.27 MHz.
Data updated .
Hyde County channels that also cover Stephan
South Dakota State Radio System
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Hyde County Fire | County Fire | 1262 | 4ee | D |
| Hyde County EMS | County EMS | 963 | 3c3 | D |
Nearest trunked radio sites
Distances are measured from the center of Stephan.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
Do fire departments and EMS use a trunked radio system in Stephan?
Yes. The county-level systems that cover Stephan are Fire and EMS talkgroups are listed for South Dakota State Radio System: 2 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Stephan?
A trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Stephan?
For Stephan, start with the Miller site of South Dakota State Radio System. Its control channels are 155.58, 159.27 MHz. Program a control channel first; the scanner finds the voice channels from it.