About Franklin Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Franklin: Jerauld County Fire 151.0325 MHz, narrow FM, 131.8 PL. Trunked: South Dakota State Radio System, for example Jerauld County EMS talkgroup 1292 (hex 50c).
- 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: South Dakota State Radio System: 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Franklin, start with the Huron site of South Dakota State Radio System, about 22 miles away. Its control channels: 159.105, 159.3 MHz.
Data updated .
Jerauld County channels that also cover Franklin
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Jerauld County Fire | Wessington Springs Fire East (with paging) | 151.0325 In 156.1350 | 131.8 PL | FMN | WRAL745 |
| Jerauld County Fire | Wessington Springs Fire West (with paging) | 151.0325 In 156.1350 | 146.2 PL | FMN | WRAL745 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Jerauld County Fire | Alpena Fire | 150.8050 In 154.2350 | 151.4 PL | FMN | WPRH257 |
| Jerauld County Fire | Wessington Springs Fireground | 151.0325 | 146.2 PL | FMN | WRAL745 |
South Dakota State Radio System
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Jerauld County EMS | Jerauld County EMS – Dispatch | 1292 | 50c | D |
Nearest trunked radio sites
Distances are measured from the center of Franklin.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Franklin?
We do not have a fire dispatch channel listed specifically for Franklin. The county-level fire dispatch channels in the same county: Jerauld County Fire 151.0325 MHz, narrow FM, 131.8 PL.
Do fire departments and EMS use a trunked radio system in Franklin?
Yes. The county-level systems that cover Franklin are Fire and EMS talkgroups are listed for South Dakota State Radio System: 1 talkgroup. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Franklin?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Franklin?
For Franklin, start with the Huron site of South Dakota State Radio System. Its control channels are 159.105, 159.3 MHz. Program a control channel first; the scanner finds the voice channels from it.