About Summit Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Summit: Lake County Fire 154.1750 MHz, narrow FM, 172 DPL. Trunked: South Dakota State Radio System, for example Lake County Fire talkgroup 1334 (hex 536).
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: South Dakota State Radio System: 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Summit, start with the Madison site of South Dakota State Radio System, about 17 miles away. Its control channels: 159.78, 160.065 MHz.
Data updated .
Lake County channels that also cover Summit
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Lake County Fire | Fire & EMS Paging | 154.1750 | 172 DPL | FMN | WPDT347 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Lake County Fire | Lake County Fire – Fire Ground | 156.1500 | 255 DPL | FMN | WRKX843 |
South Dakota State Radio System
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Lake County Fire | Lake County Fire – Dispatch | 1334 | 536 | D |
| Lake County Fire | Search and Rescue | 1343 | 53f | D |
Nearest trunked radio sites
Distances are measured from the center of Summit.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Summit?
We do not have a fire dispatch channel listed specifically for Summit. The county-level fire dispatch channels in the same county: Lake County Fire 154.1750 MHz, narrow FM, 172 DPL.
Do fire departments and EMS use a trunked radio system in Summit?
Yes. The county-level systems that cover Summit are Fire and EMS talkgroups are listed for South Dakota State Radio System: 2 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Summit?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Summit?
For Summit, start with the Madison site of South Dakota State Radio System. Its control channels are 159.78, 160.065 MHz. Program a control channel first; the scanner finds the voice channels from it.