Skip to content

Mountain Plains Fire and EMS Frequencies

We do not have frequencies listed specifically for Mountain Plains in Lawrence County, South Dakota yet. Countywide channels for Lawrence County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Spearfish (South Dakota State Radio System), about 2 miles away.

About Mountain Plains Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Mountain Plains: Lawrence County Fire 155.8650 MHz, narrow FM, 162.2 PL. Trunked: South Dakota State Radio System, for example Lawrence County Fire talkgroup 838 (hex 346).

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: South Dakota State Radio System: 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Mountain Plains, start with the Spearfish site of South Dakota State Radio System, about 2 miles away. Its control channels: 155.6025, 158.835 MHz.

Data updated .

Lawrence County channels that also cover Mountain Plains

Fire Dispatch

Fire Dispatch frequencies for Lawrence County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Lawrence County FireLawrence County Fire – Dispatch155.8650
In 153.9650
162.2 PLFMNWQEW629

South Dakota State Radio System

South Dakota State Radio System talkgroups
AgencyDescriptionTalkgroupHexMode
Lawrence County FireLawrence County Fire – Dispatch838346D
Lawrence County EMSLawrence County EMS – Dispatch1904770D

Nearest trunked radio sites

Distances are measured from the center of Mountain Plains.

Spearfish · South Dakota State Radio System
RFSS 1 · Site 66 (hex 42) · about 2 mi away
Control 155.6025, 158.835
Voice 151.19, 155.9775
Lead (Terry Peak) · South Dakota State Radio System
RFSS 1 · Site 14 (hex E) · NAC 470 · about 10 mi away
Control 160.005, 160.035, 160.095
Voice 159.6
Sturgis (Sly Hill) · South Dakota State Radio System
RFSS 1 · Site 45 (hex 2D) · about 18 mi away
Control 157.95, 158.58
Voice 155.5125, 157.8, 158.07, 159.4275
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Mountain Plains?

We do not have a fire dispatch channel listed specifically for Mountain Plains. The county-level fire dispatch channels in the same county: Lawrence County Fire 155.8650 MHz, narrow FM, 162.2 PL.

Do fire departments and EMS use a trunked radio system in Mountain Plains?

Yes. The county-level systems that cover Mountain Plains are Fire and EMS talkgroups are listed for South Dakota State Radio System: 2 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Mountain Plains?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Mountain Plains?

For Mountain Plains, start with the Spearfish site of South Dakota State Radio System. Its control channels are 155.6025, 158.835 MHz. Program a control channel first; the scanner finds the voice channels from it.