Skip to content

Howard Fire and EMS Frequencies

We do not have frequencies listed specifically for Howard in Meade County, South Dakota yet. Countywide channels for Meade County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Enning (South Dakota State Radio System), about 24 miles away.

About Howard Fire and EMS Frequencies

Quick answer: County-level ems dispatch that covers Howard: Meade County EMS 453.8250 MHz, TELM, no tone. Trunked: South Dakota State Radio System, for example Meade County Fire talkgroup 2450 (hex 992).

  • 1 conventional channel uses a digital mode (TELM), which needs a scanner that decodes that mode.
  • Trunked radio systems that carry fire and EMS traffic here: South Dakota State Radio System: 4 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Howard, start with the Enning site of South Dakota State Radio System, about 24 miles away. Its control channels: 156.225, 159.225, 159.645 MHz.

Data updated .

Meade County channels that also cover Howard

EMS Dispatch

EMS Dispatch frequencies for Meade County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Meade County EMSSturgis EMS Digital Paging453.8250
In 458.8250
TELMWQIJ571

South Dakota State Radio System

South Dakota State Radio System talkgroups
AgencyDescriptionTalkgroupHexMode
Meade County FireMeade County Fire – Dispatch2450992D
Meade County FireFort Meade Fire Department2730aaaD
Meade County EMSFaith (Police Department/EMS)89437eD
Meade County EMSMeade County EMS – Dispatch1929789D

Nearest trunked radio sites

Distances are measured from the center of Howard.

Enning · South Dakota State Radio System
RFSS 1 · Site 23 (hex 17) · NAC 470 · about 24 mi away
Control 156.225, 159.225, 159.645
Voice 157.92, 159.945
Faith · South Dakota State Radio System
RFSS 1 · Site 24 (hex 18) · about 29 mi away
Control 155.52, 157.47
Voice 159.27, 159.585
Billsburg · South Dakota State Radio System
RFSS 1 · Site 6 (hex 6) · NAC 470 · about 34 mi away
Control 159.18, 159.96
Voice 159.36, 159.66
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does EMS or the ambulance service use in Howard?

We do not have a EMS dispatch channel listed specifically for Howard. The county-level EMS dispatch channels in the same county: Meade County EMS 453.8250 MHz, TELM, no tone.

Do fire departments and EMS use a trunked radio system in Howard?

Yes. The county-level systems that cover Howard are Fire and EMS talkgroups are listed for South Dakota State Radio System: 4 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Howard?

A scanner that decodes TELM is needed for the digital conventional channels; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Howard?

For Howard, start with the Enning site of South Dakota State Radio System. Its control channels are 156.225, 159.225, 159.645 MHz. Program a control channel first; the scanner finds the voice channels from it.