Skip to content

Prospect Fire and EMS Frequencies

We do not have frequencies listed specifically for Prospect in Mellette County, South Dakota yet. Countywide channels for Mellette County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Murdo (South Dakota State Radio System), about 23 miles away.

About Prospect Fire and EMS Frequencies

Quick answer: Trunked: South Dakota State Radio System, for example Mellette County Fire talkgroup 934 (hex 3a6).

  • Trunked radio systems that carry fire and EMS traffic here: South Dakota State Radio System: 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Prospect, start with the Murdo site of South Dakota State Radio System, about 23 miles away. Its control channels: 155.73, 159.6 MHz.

Data updated .

Mellette County channels that also cover Prospect

South Dakota State Radio System

South Dakota State Radio System talkgroups
AgencyDescriptionTalkgroupHexMode
Mellette County FireMellette County Fire – Dispatch9343a6D

Nearest trunked radio sites

Distances are measured from the center of Prospect.

Murdo · South Dakota State Radio System
RFSS 1 · Site 29 (hex 1D) · NAC 470 · about 23 mi away
Control 155.73, 159.6
Voice 155.445, 159.345
White River · South Dakota State Radio System
RFSS 1 · Site 17 (hex 11) · NAC 470 · about 27 mi away
Control 156.15, 159.195, 159.435
Voice 159.705
Long Valley · South Dakota State Radio System
RFSS 1 · Site 26 (hex 1A) · NAC 470 · about 29 mi away
Control 159.93, 160.2
Voice 156.195, 159.465
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

Do fire departments and EMS use a trunked radio system in Prospect?

Yes. The county-level systems that cover Prospect are Fire and EMS talkgroups are listed for South Dakota State Radio System: 1 talkgroup. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Prospect?

A trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Prospect?

For Prospect, start with the Murdo site of South Dakota State Radio System. Its control channels are 155.73, 159.6 MHz. Program a control channel first; the scanner finds the voice channels from it.