Skip to content

Clare Fire and EMS Frequencies

We do not have frequencies listed specifically for Clare in Moody County, South Dakota yet. Countywide channels for Moody County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Brookings (South Dakota State Radio System), about 19 miles away.

About Clare Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Clare: Moody County Fire 158.8050 MHz, FM, 118.8 PL. Trunked: South Dakota State Radio System, for example Moody County Fire talkgroup 1330 (hex 532).

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: South Dakota State Radio System: 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Clare, start with the Brookings site of South Dakota State Radio System, about 19 miles away. Its control channels: 157.92, 158.04 MHz.

Data updated .

Moody County channels that also cover Clare

Fire Dispatch

Fire Dispatch frequencies for Moody County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Moody County FireFire/EMS Paging/Operations (Sheriff, Flandreau Police and Colman Police)158.8050
In 153.8600
118.8 PLFMKJV343

South Dakota State Radio System

South Dakota State Radio System talkgroups
AgencyDescriptionTalkgroupHexMode
Moody County FireMoody County Fire – Dispatch1330532D
Moody County FireMoody County Fire – Alternate1331533D

Nearest trunked radio sites

Distances are measured from the center of Clare.

Brookings · South Dakota State Radio System
RFSS 1 · Site 39 (hex 27) · NAC 475 · about 19 mi away
Control 157.92, 158.04
Voice 157.8, 158.61
Baltic · South Dakota State Radio System
RFSS 1 · Site 43 (hex 2B) · NAC 479 · about 21 mi away
Control 157.2625, 157.755
Voice 158.49, 158.64
Minnehaha Simulcast · South Dakota State Radio System
RFSS 1 · Site 61 (hex 3D) · NAC 479 · about 21 mi away
Control 157.2625, 157.755
Voice 157.95, 158.49, 158.64
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Clare?

We do not have a fire dispatch channel listed specifically for Clare. The county-level fire dispatch channels in the same county: Moody County Fire 158.8050 MHz, FM, 118.8 PL.

Do fire departments and EMS use a trunked radio system in Clare?

Yes. The county-level systems that cover Clare are Fire and EMS talkgroups are listed for South Dakota State Radio System: 2 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Clare?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Clare?

For Clare, start with the Brookings site of South Dakota State Radio System. Its control channels are 157.92, 158.04 MHz. Program a control channel first; the scanner finds the voice channels from it.