About Belmont Fire and EMS Frequencies
Quick answer: Trunked: South Dakota State Radio System, for example Spink County Fire talkgroup 1186 (hex 4a2).
- 7 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: South Dakota State Radio System: 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Belmont, start with the Redfield site of South Dakota State Radio System, about 16 miles away. Its control channels: 155.415 MHz.
Data updated .
Spink County channels that also cover Belmont
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Spink County Fire | Redfield Fire | 154.2500 | FM | WPML302 | |
| Spink County Fire | Conde Fire | 453.7000 In 458.7000 | FM | WPBG995 | |
| Spink County Fire | Mellette Fire | 453.7750 In 458.7750 | FM | WNAY990 | |
| Spink County Fire | Brentford Fire | 460.1500 In 465.1500 | FM | WPUB260 | |
| Spink County Fire | Turton Fire | 460.5750 In 465.5750 | FM | WPCQ969 |
EMS Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Spink County EMS | Hospital – EMS National | 155.3400 | FM | KFR222 | |
| Spink County EMS | Hospital – EMS Local | 155.3850 | FM | KFR222 |
South Dakota State Radio System
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Spink County Fire | Spink County Fire – Dispatch | 1186 | 4a2 | D |
| Spink County EMS | Spink County EMS – Dispatch | 1185 | 4a1 | D |
Nearest trunked radio sites
Distances are measured from the center of Belmont.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
Do fire departments and EMS use a trunked radio system in Belmont?
Yes. The county-level systems that cover Belmont are Fire and EMS talkgroups are listed for South Dakota State Radio System: 2 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Belmont?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Belmont?
For Belmont, start with the Redfield site of South Dakota State Radio System. Its control channels are 155.415 MHz. Program a control channel first; the scanner finds the voice channels from it.