About Salem Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Salem: Turner County Fire 453.6000 MHz, FM, 69.3 PL. Trunked: South Dakota State Radio System, for example Turner County Fire talkgroup 1129 (hex 469).
- 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: South Dakota State Radio System: 6 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Salem, start with the Turkey Ridge site of South Dakota State Radio System, about 3 miles away. Its control channels: 157.95, 159.375, 159.945 MHz.
Data updated .
Turner County channels that also cover Salem
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Turner County Fire | Fire/EMS Marion (NW) | 453.6000 In 458.6000 | 69.3 PL | FM | WNQU221 |
| Turner County Fire | Fire/EMS Parkerr (NE) | 453.6000 In 458.6000 | 173.8 PL | FM | WNQU221 |
| Turner County Fire | Fire/EMS Viborg (SE) | 453.6000 In 458.6000 | 141.3 PL | FM | WBQU221 |
South Dakota State Radio System
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Turner County Fire | Turner County Fire – Dispatch | 1129 | 469 | D |
| Turner County Fire | Turner County Fire – Fire Ground | 1130 | 46a | D |
| Turner County Fire | Turner County Fire – Fire Ground | 1131 | 46b | D |
| Turner County EMS | Turner Co Medical | 1132 | 46c | D |
| Turner County EMS | Turner Co Medical | 1133 | 46d | D |
| Turner County EMS | Turner Co Medical | 1134 | 46e | D |
Nearest trunked radio sites
Distances are measured from the center of Salem.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Salem?
We do not have a fire dispatch channel listed specifically for Salem. The county-level fire dispatch channels in the same county: Turner County Fire 453.6000 MHz, FM, 69.3 PL.
Do fire departments and EMS use a trunked radio system in Salem?
Yes. The county-level systems that cover Salem are Fire and EMS talkgroups are listed for South Dakota State Radio System: 6 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Salem?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Salem?
For Salem, start with the Turkey Ridge site of South Dakota State Radio System. Its control channels are 157.95, 159.375, 159.945 MHz. Program a control channel first; the scanner finds the voice channels from it.