Skip to content

Walshtown Fire and EMS Frequencies

We do not have frequencies listed specifically for Walshtown in Yankton County, South Dakota yet. Countywide channels for Yankton County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Yankton (Gavin's Point) (South Dakota State Radio System), about 12 miles away.

About Walshtown Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Walshtown: Yankton County Fire 155.7600 MHz, narrow FM, 156.7 PL.

  • 6 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Yankton County channels that also cover Walshtown

Fire Dispatch

Fire Dispatch frequencies for Yankton County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Yankton County FireCounty Fire/EMS Dispatch155.7600
In 158.9400
156.7 PLFMNKNFJ265

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Yankton County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Yankton County FireLesterville Fire153.9650
In 156.0000
FMNWNRO756
Yankton County FireGayville Fire154.0400FMNWQOQ561

Hospitals & Medical

Hospitals & Medical frequencies for Yankton County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Yankton County HospitalYankton Hospital Paging152.0075FMNWPMM258
Yankton County HospitalHuman Services Center460.4750
In 465.4750
136.5 PLFMNWNSP399
Yankton County HospitalSacred Heart Hospital Operations461.8500141.3 PLFMNWQUE476

Nearest trunked radio sites

Distances are measured from the center of Walshtown.

Yankton (Gavin's Point) · South Dakota State Radio System
RFSS 1 · Site 42 (hex 2A) · NAC 470 · about 12 mi away
Control 157.89, 158.07, 158.67
Voice 158.52
Turkey Ridge · South Dakota State Radio System
RFSS 1 · Site 15 (hex F) · NAC 47F · about 14 mi away
Control 157.95, 159.375, 159.945
Voice 157.83
Vermillion · South Dakota State Radio System
RFSS 1 · Site 35 (hex 23) · NAC 473 · about 27 mi away
Control 157.2, 159.285
Voice 157.2875, 157.3875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Walshtown?

We do not have a fire dispatch channel listed specifically for Walshtown. The county-level fire dispatch channels in the same county: Yankton County Fire 155.7600 MHz, narrow FM, 156.7 PL.

What scanner do I need to listen to fire and EMS in Walshtown?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Walshtown?

For Walshtown, start with the Yankton (Gavin's Point) site of South Dakota State Radio System. Its control channels are 157.89, 158.07, 158.67 MHz. Program a control channel first; the scanner finds the voice channels from it.