Skip to content

Alcoa Fire and EMS Frequencies

Alcoa in Blount County, Tennessee has 1 conventional frequency and 0 trunked talkgroups listed for local fire and EMS agencies. The closest trunked radio site we have is Maryville (Tennessee Advanced Communications Network (TACN)), about 4 miles away.

About Alcoa Fire and EMS Frequencies

Quick answer: Fire dispatch for Alcoa: Alcoa Fire 453.7500 MHz, narrow FM, 127.3 PL. County-level ems dispatch that covers Alcoa: Blount County EMS 154.3550 MHz, narrow FM, 532 DPL.

  • 11 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Alcoa conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Alcoa
AgencyDescriptionFrequency (MHz)ToneModeFCC
Alcoa FireAlcoa Fire – Dispatch453.7500
In 458.7500
127.3 PLFMNWRA239

Blount County channels that also cover Alcoa

Fire Dispatch

Fire Dispatch frequencies for Blount County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Blount County FireBlount County Fire – Dispatch453.1000
In 458.1000
127.3 PLFMNWPRZ903

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Blount County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Blount County FireHazMat Operations453.9000
In 458.9000
127.3 PLFMN—

EMS Dispatch

EMS Dispatch frequencies for Blount County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Blount County EMSCounty Rescue / AMR Dispatch154.3550
In 154.8450
532 DPLFMNWCT254
Blount County EMSPriority Ambulance Service451.5500
In 456.5500
186.2 PLFMNWQXQ213
Blount County EMSRescue Squad UHF460.7000
In 465.7000
88.5 PLFMNKYZ427

EMS Tactical

EMS Tactical frequencies for Blount County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Blount County EMSRescue Squad Low Band37.9000FMKNHU754
Blount County EMSAMR EMS154.0100FMNWCT254
Blount County EMSRescue Squad Operations154.0550
In 158.9175
FMNWRA239
Blount County EMSAMR EMS159.1500025 DPLFMNWCT254

Hospitals & Medical

Hospitals & Medical frequencies for Blount County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Blount County HospitalBlount Memorial Hospital Medcom155.3400FMNWRA239

Nearest trunked radio sites

Distances are measured from the center of Alcoa.

Maryville · Tennessee Advanced Communications Network (TACN)
RFSS 2 · Site 27 (hex 1B) · NAC 2A0 · about 4 mi away
Control 774.13125, 774.48125
Voice 770.83125, 771.83125, 772.15625, 772.98125, 773.78125
Townsend · Tennessee Advanced Communications Network (TACN)
RFSS 2 · Site 29 (hex 1D) · NAC 2A0 · about 13 mi away
Control 853.225, 853.5375
Voice 851.15, 851.4875, 851.7625, 852.1125
Sharps Ridge (Knoxville) · Tennessee Advanced Communications Network (TACN)
RFSS 2 · Site 20 (hex 14) · NAC 2A3 · about 13 mi away
Control 769.60625, 770.53125
Voice 769.93125, 771.53125, 772.45625, 773.73125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Alcoa?

Fire dispatch channels listed for Alcoa: Alcoa Fire 453.7500 MHz, narrow FM, 127.3 PL.

What frequency does EMS or the ambulance service use in Alcoa?

We do not have a EMS dispatch channel listed specifically for Alcoa. The county-level EMS dispatch channels in the same county: Blount County EMS 154.3550 MHz, narrow FM, 532 DPL.

What scanner do I need to listen to fire and EMS in Alcoa?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Alcoa?

For Alcoa, start with the Maryville site of Tennessee Advanced Communications Network (TACN). Its control channels are 774.13125, 774.48125 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Alcoa fire and EMS frequencies encrypted?

None of the 1 conventional frequencies listed for Alcoa are marked encrypted.