About Cannon County Fire and EMS Frequencies
Quick answer: Fire dispatch for Cannon County: Cannon County Fire 155.0550 MHz, narrow FM, 151.4 PL (unconfirmed). EMS dispatch for Cannon County: Cannon County EMS 154.9950 MHz, narrow FM, 174 DPL (unconfirmed).
- 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- 1 conventional channel uses a digital mode (DMR), which needs a scanner that decodes that mode.
Data updated .
Cannon County conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Cannon County Fire Unconfirmed | Cannon County Fire – Dispatch | 155.0550 In 159.6300 | 151.4 PL | FMN | WPXF380 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Cannon County Fire | Cannon County Fire – Fire Ground /Tactical | 155.0250 | FMN | WPXF380 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Cannon County EMS Unconfirmed | Cannon County EMS – Dispatch | 154.9950 In 151.4675 | 174 DPL | FMN | WQDL539 |
| Cannon County EMS Unconfirmed | Cannon County EMS – Dispatch | 154.9950 In 151.4675 | CC 5 · TG 800 · SL 2 | DMR | WQDL539 |
EMS Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Cannon County EMS Unconfirmed | Cannon County EMS – Tactical Channel | 154.0775 | FMN | WQDL539 |
Radio system sites in Cannon County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Cannon County
Common questions
What frequency does the fire department use in Cannon County?
Fire dispatch channels listed for Cannon County: Cannon County Fire 155.0550 MHz, narrow FM, 151.4 PL (unconfirmed).
What frequency does EMS or the ambulance service use in Cannon County?
EMS dispatch channels listed for Cannon County: Cannon County EMS 154.9950 MHz, narrow FM, 174 DPL (unconfirmed).
What scanner do I need to listen to fire and EMS in Cannon County?
The analog conventional channels can be heard on any scanner; a scanner that decodes DMR is needed for the digital conventional channels.
What are the control channels for trunked radio in Cannon County?
For Cannon County, start with the Short Mountain (VHF) site of Tennessee Advanced Communications Network (TACN). Its control channels are 152.515, 161.8 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Cannon County fire and EMS frequencies encrypted?
None of the 5 conventional frequencies listed for Cannon County are marked encrypted.