About McKenzie Fire and EMS Frequencies
Quick answer: Fire dispatch for McKenzie: McKenzie Fire 155.8800 MHz, narrow FM, 162.2 PL. EMS dispatch for McKenzie: McKenzie EMS 155.6475 MHz, narrow FM, 225 DPL. Trunked: Carroll County Public Safety, for example McKenzie Fire talkgroup 38768 (hex 9770).
- 7 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Carroll County Public Safety: 1 talkgroup; Carroll County Public Safety: 3 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For McKenzie, start with the Gleason site of Tennessee Advanced Communications Network (TACN), about 9 miles away. Its control channels: 769.80625, 771.53125 MHz.
Data updated .
McKenzie conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| McKenzie Fire | McKenzie Fire – Dispatch | 155.8800 In 158.8950 | 162.2 PL | FMN | WPGM319 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| McKenzie EMS | McKenzie EMS – Dispatch | 155.6475 In 151.2125 | 225 DPL | FMN | WQUX350 |
McKenzie trunked talkgroups
Carroll County Public Safety
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| McKenzie Fire | McKenzie Fire – Dispatch | 38768 | 9770 | T |
Carroll County channels that also cover McKenzie
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Carroll County Fire | Carroll County Fire – Dispatch Patched to P25 | 154.3700 In 154.0100 | 167.9 PL | FMN | WQFW223 |
| Huntington Fire | Huntington Fire – Dispatch | 453.1250 In 458.1250 | 225.7 PL | FMN | WPPW288 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Carroll County EMS | Carroll County EMS – Dispatch | 155.3550 In 150.8050 | 123.0 PL | FMN | WPTW271 |
| Carroll County EMS | Rescue Squad | 155.4000 | 127.3 PL | FMN | KNGW658 |
| Huntington EMS | Huntington Baptist EMS | 155.4000 | 127.3 PL | FMN | KNGW658 |
Carroll County Public Safety
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Carroll County Fire | Carroll County Fire – Dispatch – Countywide | 22384 | 5770 | T |
| Huntingtdon Fire | Huntingtdon Fire – Dispatch | 55152 | d770 | T |
| Carroll County EMS | First Responders – Dispatch | 22434 | 57a2 | T |
Nearest trunked radio sites
Distances are measured from the center of McKenzie.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in McKenzie?
Fire dispatch channels listed for McKenzie: McKenzie Fire 155.8800 MHz, narrow FM, 162.2 PL.
What frequency does EMS or the ambulance service use in McKenzie?
EMS dispatch channels listed for McKenzie: McKenzie EMS 155.6475 MHz, narrow FM, 225 DPL.
Do fire departments and EMS use a trunked radio system in McKenzie?
Yes. Fire and EMS talkgroups are listed for Carroll County Public Safety: 1 talkgroup. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in McKenzie?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in McKenzie?
For McKenzie, start with the Gleason site of Tennessee Advanced Communications Network (TACN). Its control channels are 769.80625, 771.53125 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are McKenzie fire and EMS frequencies encrypted?
None of the 2 conventional frequencies listed for McKenzie are marked encrypted.
Are McKenzie fire and EMS talkgroups encrypted?
None of the 1 talkgroups listed for McKenzie are marked encrypted.