Skip to content

Chester County Fire and EMS Frequencies

Chester County in Tennessee has 5 countywide conventional frequencies and 0 countywide talkgroups in our database. Use the list of 5 cities and communities below for local fire departments and EMS agencies.

About Chester County Fire and EMS Frequencies

Quick answer: Fire dispatch for Chester County: Chester County Fire 154.7850 MHz, narrow FM, 218.1 PL. EMS dispatch for Chester County: Henderson Medical Center/Selmer Medical Center EMS 153.2900 MHz, DMR, CC 2 · TG 103 · SL 1.

  • 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 1 conventional channel uses a digital mode (DMR), which needs a scanner that decodes that mode.

Data updated .

Chester County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Chester County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Chester County FireFirst Responders – Dispatch154.7850
In 155.9100
218.1 PLFMNWQBD594
Chester County FireChester County Fire – Dispatch155.3100
In 150.7750
79.7 PLFMNWPUX676

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Chester County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Chester County FireFire Private – Tactical154.1900127.3 PLFMNWQPC487
Chester County FireFirst – Responders – Private Tactical155.2200FMNWQBD594

EMS Dispatch

EMS Dispatch frequencies for Chester County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Henderson Medical Center/Selmer Medical Center EMSHenderson Medical Center/Selmer Medical Center EMS – South Dispatch (Henderson)153.2900
In 159.9075
CC 2 · TG 103 · SL 1DMRWQZW221

Radio system sites in Chester County

Program the control channel first; your scanner finds the voice channels from it.

Chickasaw VHF · Tennessee Advanced Communications Network (TACN)
RFSS 4 · Site 28 (hex 1C) · NAC 2AE
Control 152.065, 152.185, 152.745
Voice 152.515, 161.8, 161.9, 170.6
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Chester County

Common questions

What frequency does the fire department use in Chester County?

Fire dispatch channels listed for Chester County: Chester County Fire 154.7850 MHz, narrow FM, 218.1 PL.

What frequency does EMS or the ambulance service use in Chester County?

EMS dispatch channels listed for Chester County: Henderson Medical Center/Selmer Medical Center EMS 153.2900 MHz, DMR, CC 2 · TG 103 · SL 1.

What scanner do I need to listen to fire and EMS in Chester County?

The analog conventional channels can be heard on any scanner; a scanner that decodes DMR is needed for the digital conventional channels.

What are the control channels for trunked radio in Chester County?

For Chester County, start with the Chickasaw VHF site of Tennessee Advanced Communications Network (TACN). Its control channels are 152.065, 152.185, 152.745 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Chester County fire and EMS frequencies encrypted?

None of the 5 conventional frequencies listed for Chester County are marked encrypted.