Skip to content

Dyer County Fire and EMS Frequencies

Dyer County in Tennessee has 4 countywide conventional frequencies and 0 countywide talkgroups in our database. Use the list of 8 cities and communities below for local fire departments and EMS agencies.

About Dyer County Fire and EMS Frequencies

Quick answer: Fire dispatch for Dyer County: Dyer County Fire 152.0075 MHz, narrow FM, no tone. EMS dispatch for Dyer County: Dyer County EMS 453.0750 MHz, narrow FM, 118.8 PL.

  • 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Dyer County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Dyer County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Dyer County FireDyer County Fire – Paging152.0075FMNWQPS792
Dyer County FireDyer County Fire – Dispatch (Channel 1)154.3550
In 150.7750
100.0 PLFMNWNHV723

EMS Dispatch

EMS Dispatch frequencies for Dyer County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Dyer County EMSEMA/Rescue Squad453.0750
In 458.0750
118.8 PLFMNWPQB676
Dyer County EMSDyer County EMS – Paging462.8750FMNWQPH439

Radio system sites in Dyer County

Program the control channel first; your scanner finds the voice channels from it.

Millsfield · Tennessee Advanced Communications Network (TACN)
RFSS 4 · Site 35 (hex 23) · NAC 2A6
Control 769.28125, 770.10625, 770.68125
Voice 769.78125, 771.00625, 771.08125, 771.55625, 771.80625, 773.08125
Dyersburg · Tennessee Advanced Communications Network (TACN)
RFSS 4 · Site 37 (hex 25) · NAC 2AD
Control 856.4875, 857.4875, 858.4875, 859.4875
Voice 854.3625, 856.2125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Dyer County

Common questions

What frequency does the fire department use in Dyer County?

Fire dispatch channels listed for Dyer County: Dyer County Fire 152.0075 MHz, narrow FM, no tone.

What frequency does EMS or the ambulance service use in Dyer County?

EMS dispatch channels listed for Dyer County: Dyer County EMS 453.0750 MHz, narrow FM, 118.8 PL.

What scanner do I need to listen to fire and EMS in Dyer County?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Dyer County?

For Dyer County, start with the Millsfield site of Tennessee Advanced Communications Network (TACN). Its control channels are 769.28125, 770.10625, 770.68125 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Dyer County fire and EMS frequencies encrypted?

None of the 4 conventional frequencies listed for Dyer County are marked encrypted.