About Rossville Fire and EMS Frequencies
Quick answer: Fire dispatch for Rossville: Rossville Fire 158.7900 MHz, narrow FM, 072 DPL.
- 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
Data updated .
Rossville conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Rossville Fire | Rossville Fire – Dispatch | 158.7900 In 154.8300 | 072 DPL | FMN | WPYS898 |
Fayette County channels that also cover Rossville
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Fayette County Fire | Fayette County Fire – Dispatch – Countywide | 154.2200 In 154.7100 | 162.2 PL | FMN | WQAC889 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Fayette County Fire | Braden Fire – Tactical | 155.7450 In 158.8650 | FMN | WPKC424 |
Nearest trunked radio sites
Distances are measured from the center of Rossville.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Rossville?
Fire dispatch channels listed for Rossville: Rossville Fire 158.7900 MHz, narrow FM, 072 DPL.
What scanner do I need to listen to fire and EMS in Rossville?
The analog conventional channels can be heard on any scanner.
What are the control channels for trunked radio in Rossville?
For Rossville, start with the Collierville site of Collierville Public Safety. Its control channels are 770.55625, 770.80625, 771.05625, 771.35625 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Rossville fire and EMS frequencies encrypted?
None of the 1 conventional frequencies listed for Rossville are marked encrypted.