About Jamestown Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Jamestown: Fentress County Fire 155.8800 MHz, narrow FM, 100.0 PL. County-level ems dispatch that covers Jamestown: Fentress County EMS 154.3550 MHz, DMR, no tone.
- 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- 1 conventional channel uses a digital mode (DMR), which needs a scanner that decodes that mode.
Data updated .
Fentress County channels that also cover Jamestown
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Fentress County Fire | Fentress County Fire – Dispatch – Countywide | 155.8800 In 153.8600 | 100.0 PL | FMN | KCI365 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Fentress County EMS Old | EMA – Rescue (Channel 1) | 154.3550 In 156.1575 | 331 DPL | FMN | WPWT903 |
| Fentress County EMS | EMA – Rescue – New | 154.3550 In 156.1575 | DMR | WPWT903 | |
| Fentress County EMS | EMA – Medical (Channel 2) | 155.5950 In 153.9950 | 243 DPL | FMN | WPWT903 |
Nearest trunked radio sites
Distances are measured from the center of Jamestown.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Jamestown?
We do not have a fire dispatch channel listed specifically for Jamestown. The county-level fire dispatch channels in the same county: Fentress County Fire 155.8800 MHz, narrow FM, 100.0 PL.
What frequency does EMS or the ambulance service use in Jamestown?
We do not have a EMS dispatch channel listed specifically for Jamestown. The county-level EMS dispatch channels in the same county: Fentress County EMS 154.3550 MHz, DMR, no tone.
What scanner do I need to listen to fire and EMS in Jamestown?
The analog conventional channels can be heard on any scanner; a scanner that decodes DMR is needed for the digital conventional channels.
What are the control channels for trunked radio in Jamestown?
For Jamestown, start with the Twinton 700 site of Tennessee Advanced Communications Network (TACN). Its control channels are 770.33125, 770.60625, 771.10625 MHz. Program a control channel first; the scanner finds the voice channels from it.