Skip to content

Blaine Fire and EMS Frequencies

We do not have frequencies listed specifically for Blaine in Grainger County, Tennessee yet. Countywide channels for Grainger County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Knox County Simulcast (Tennessee Advanced Communications Network (TACN)), about 16 miles away.

About Blaine Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Blaine: Grainger County Fire 155.7825 MHz, narrow FM, 167.9 PL. County-level ems dispatch that covers Blaine: Grainger County EMS 460.1250 MHz, DMR, CC 7 · TG 80 · SL 1.

  • 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 4 conventional channels use a digital mode (DMR), which needs a scanner that decodes that mode.

Data updated .

Grainger County channels that also cover Blaine

Fire Dispatch

Fire Dispatch frequencies for Grainger County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Grainger County FireBean Station Volunteer Fire – Dispatch155.7825
In 151.0325
167.9 PLFMNWPVM340
Grainger County FireFire/EMS Dispatch Analog453.3375
In 458.3375
167.9 PLFMNWPXT229
Grainger County FirePowder Springs Volunteer Fire – Dispatch Analog453.6250
In 458.6250
167.9 PLFMNWPPW476
Grainger County FireRutledge Volunteer Fire -Dispatch Analog460.0375
In 465.0375
167.9 PLFMNWPPW476

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Grainger County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Grainger County FireRescue Squad453.5625
In 458.5625
167.9 PLFMNWPTN536
Grainger County FirePowder Springs Volunteer Fire Digital453.6250
In 458.6250
CC 7 · TG 10 · SL 1DMRWPPW476
Grainger County FireRutledge Volunteer Fire Digital460.0375
In 465.0375
DMRWPPW476

EMS Dispatch

EMS Dispatch frequencies for Grainger County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Grainger County EMSCounty EMS Dispatch460.1250
In 465.1250
CC 7 · TG 80 · SL 1DMRWPDQ319

EMS Tactical

EMS Tactical frequencies for Grainger County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Grainger County EMSEMS Operations453.4875
In 458.4875
CC 7 · TG * · SL *DMRWPRH893

Nearest trunked radio sites

Distances are measured from the center of Blaine.

Knox County Simulcast · Tennessee Advanced Communications Network (TACN)
RFSS 3 · Site 10 (hex A) · NAC 2AA · about 16 mi away
Control 859.2125, 859.4375, 859.7125, 859.9375
Voice 854.2125, 854.4125, 854.5875, 854.8875, 856.2125, 856.4375, 856.7125, 856.9375, 857.2125, 857.4375, 857.7125, 857.9375, 858.2125, 858.4375, 858.7125, 858.9375
Sharps Ridge (Knoxville) · Tennessee Advanced Communications Network (TACN)
RFSS 2 · Site 20 (hex 14) · NAC 2A3 · about 17 mi away
Control 769.60625, 770.53125
Voice 769.93125, 771.53125, 772.45625, 773.73125
Chuck Swan WMA 700 · Tennessee Advanced Communications Network (TACN)
RFSS 3 · Site 22 (hex 16) · NAC 2A2 · about 19 mi away
Control 771.10625, 771.73125
Voice 772.23125, 772.54375, 772.80625, 773.90625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Blaine?

We do not have a fire dispatch channel listed specifically for Blaine. The county-level fire dispatch channels in the same county: Grainger County Fire 155.7825 MHz, narrow FM, 167.9 PL.

What frequency does EMS or the ambulance service use in Blaine?

We do not have a EMS dispatch channel listed specifically for Blaine. The county-level EMS dispatch channels in the same county: Grainger County EMS 460.1250 MHz, DMR, CC 7 · TG 80 · SL 1.

What scanner do I need to listen to fire and EMS in Blaine?

The analog conventional channels can be heard on any scanner; a scanner that decodes DMR is needed for the digital conventional channels.

What are the control channels for trunked radio in Blaine?

For Blaine, start with the Knox County Simulcast site of Tennessee Advanced Communications Network (TACN). Its control channels are 859.2125, 859.4375, 859.7125, 859.9375 MHz. Program a control channel first; the scanner finds the voice channels from it.