About Greene County Fire and EMS Frequencies
Quick answer: Fire dispatch for Greene County: Greene County Fire 155.3250 MHz, narrow FM, 192.8 PL. EMS dispatch for Greene County: Greene County EMS 154.0850 MHz, narrow FM, 073 DPL (expired).
- 6 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- 2 entries are marked expired, so they may no longer be in use.
Data updated .
Greene County conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Greene County Fire | Greene County Fire – Dispatch | 155.3250 In 151.1000 | 192.8 PL | FMN | WPPG635 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Greene County Fire | Sunnyside Volunteer Fire Department Fireground | 154.1300 | FMN | WQFR926 | |
| Greene County Fire | Caney Branch Volunteer Fire Department | 154.4000 | FMN | KNBY545 | |
| Greene County Fire | Greene County Fire – Fire Ground (Countywide) | 154.4000 | 100.0 PL | FMN | KNBY545 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Greene County EMS Expired: Expired 2/14 | Greene County EMS – Dispatch (Backup to TACN) <B> | 154.0850 In 150.8050 | 073 DPL | FMN | KVZ602 |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Greene County Hospital Expired: Expired 2/14 | EMS/Rescue HEAR | 155.3400 | FMN | KVZ602 |
Radio system sites in Greene County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Greene County
Common questions
What frequency does the fire department use in Greene County?
Fire dispatch channels listed for Greene County: Greene County Fire 155.3250 MHz, narrow FM, 192.8 PL.
What frequency does EMS or the ambulance service use in Greene County?
EMS dispatch channels listed for Greene County: Greene County EMS 154.0850 MHz, narrow FM, 073 DPL (expired).
What scanner do I need to listen to fire and EMS in Greene County?
The analog conventional channels can be heard on any scanner.
What are the control channels for trunked radio in Greene County?
For Greene County, start with the Viking Mountain site of Tennessee Advanced Communications Network (TACN). Its control channels are 769.36875 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Greene County fire and EMS frequencies encrypted?
None of the 6 conventional frequencies listed for Greene County are marked encrypted.