About Hamblen County Fire and EMS Frequencies
Quick answer: Fire dispatch for Hamblen County: Hamblen County Fire 453.7625 MHz, narrow FM, 162.2 PL. EMS dispatch for Hamblen County: Hamblen County EMS 155.0700 MHz, narrow FM, 173.8 PL.
- 7 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- 2 conventional channels use a digital mode (NXDN48), which needs a scanner that decodes that mode.
Data updated .
Hamblen County conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Hamblen County Fire | Hamblen County Fire – Dispatch | 453.7625 In 458.7625 | 162.2 PL | FMN | WPTG373 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Hamblen County Fire | Hamblen County Fire – Tactical Channel | 46.0600 | FM | KB28043 | |
| Hamblen County Fire | Hamblen County Fire – Tactical Channel | 46.5000 | FM | KB28043 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Hamblen County EMS | Rescue Squad/EMS – Dispatch 1 Analog | 155.0700 In 150.7750 | 173.8 PL | FMN | WPEP474 |
| Hamblen County EMS | Rescue Squad/EMS – Dispatch 1 Digital | 155.0700 In 150.7750 | NXDN48 | WPEP474 | |
| Hamblen County EMS | Rescue Squad/EMS – Dispatch 2 Analog | 155.5950 In 154.8300 | FMN | WPEP474 | |
| Hamblen County EMS | Rescue Squad/EMS – Dispatch 2 Digital | 155.5950 In 154.8300 | NXDN48 | WPEP474 | |
| Hamblen County EMS | Allied EMS Dispatch | 461.2750 In 466.2750 | 141.3 PL | FMN | WPHT580 |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Morristown Hamblen County Hospital | Morristown Hamblen County Hospital – Patient Reports | 155.3400 | FMN | KNFQ453 |
Radio system sites in Hamblen County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Hamblen County
Common questions
What frequency does the fire department use in Hamblen County?
Fire dispatch channels listed for Hamblen County: Hamblen County Fire 453.7625 MHz, narrow FM, 162.2 PL.
What frequency does EMS or the ambulance service use in Hamblen County?
EMS dispatch channels listed for Hamblen County: Hamblen County EMS 155.0700 MHz, narrow FM, 173.8 PL.
What scanner do I need to listen to fire and EMS in Hamblen County?
The analog conventional channels can be heard on any scanner; a scanner that decodes NXDN48 is needed for the digital conventional channels.
What are the control channels for trunked radio in Hamblen County?
For Hamblen County, start with the Morristown (Pine Brooke) site of Tennessee Advanced Communications Network (TACN). Its control channels are 769.50625, 771.35625 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Hamblen County fire and EMS frequencies encrypted?
None of the 9 conventional frequencies listed for Hamblen County are marked encrypted.