About Whiteville Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Whiteville: Hardeman County Fire 154.1150 MHz, narrow FM, 167.9 PL. County-level ems dispatch that covers Whiteville: Hardeman County EMS 151.0850 MHz, narrow FM, 074 DPL.
- 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- 2 conventional channels use a digital mode (DMR), which needs a scanner that decodes that mode.
Data updated .
Hardeman County channels that also cover Whiteville
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Hardeman County Fire | Hardeman County Fire – Dispatch | 154.1150 In 155.9700 | 167.9 PL | FMN | KNNR405 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Hardeman County EMS | Hardeman County EMS – Dispatch | 151.0850 In 156.1500 | 074 DPL | FMN | WQEW657 |
| Hardeman County EMS | Hardeman County EMS – Dispatch | 152.3600 In 157.6200 | 606 DPL | FMN | WQTW323 |
| Hardeman County EMS | Medlink – ALS Dispatch | 152.4275 In 157.6875 | CC 2 · TG 103 · SL 1 | DMR | WQSV645 |
| Hardeman County EMS | Medlink – BLS Dispatch | 152.4275 In 157.6875 | CC 2 · TG 103 · SL 2 | DMR | WQSV645 |
| Hardeman County EMS | Rescue Squad | 453.6750 In 458.6750 | 167.9 PL | FMN | WQQQ943 |
Nearest trunked radio sites
Distances are measured from the center of Whiteville.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Whiteville?
We do not have a fire dispatch channel listed specifically for Whiteville. The county-level fire dispatch channels in the same county: Hardeman County Fire 154.1150 MHz, narrow FM, 167.9 PL.
What frequency does EMS or the ambulance service use in Whiteville?
We do not have a EMS dispatch channel listed specifically for Whiteville. The county-level EMS dispatch channels in the same county: Hardeman County EMS 151.0850 MHz, narrow FM, 074 DPL.
What scanner do I need to listen to fire and EMS in Whiteville?
The analog conventional channels can be heard on any scanner; a scanner that decodes DMR is needed for the digital conventional channels.
What are the control channels for trunked radio in Whiteville?
For Whiteville, start with the Whiteville site of Tennessee Advanced Communications Network (TACN). Its control channels are 769.53125, 771.53125, 773.30625, 774.03125 MHz. Program a control channel first; the scanner finds the voice channels from it.