Skip to content

Lake County Fire and EMS Frequencies

Lake County in Tennessee has 3 countywide conventional frequencies and 0 countywide talkgroups in our database. Use the list of 3 cities and communities below for local fire departments and EMS agencies.

About Lake County Fire and EMS Frequencies

Quick answer: Fire dispatch for Lake County: Lake County Fire 453.0250 MHz, narrow FM, 127.3 PL.

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 1 conventional channel uses a digital mode (DMR), which needs a scanner that decodes that mode.
  • 1 listed entry is marked encrypted. No scanner can decode encrypted audio.

Data updated .

Lake County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Lake County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Lake County FireFire/EMA Dispatch453.0250
In 458.0250
127.3 PLFMNWQPW302

EMS Dispatch

EMS Dispatch frequencies for Lake County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Lake County EMSLake County EMS – Dispatch453.8250
In 458.8250
DMR EncryptedWQKV670

EMS Tactical

EMS Tactical frequencies for Lake County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Lake County EMSLake County EMS – Tactical Channel154.1300FMNKD21024

Radio system sites in Lake County

Program the control channel first; your scanner finds the voice channels from it.

Northwest: TNDOC · Tennessee Advanced Communications Network (TACN)
RFSS 4 · Site 52 (hex 34) · NAC 2A5
Control 854.1375, 859.4375
Voice 856.4375, 856.9625, 857.4375, 857.9625, 858.4375, 860.4375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Lake County

Common questions

What frequency does the fire department use in Lake County?

Fire dispatch channels listed for Lake County: Lake County Fire 453.0250 MHz, narrow FM, 127.3 PL.

What scanner do I need to listen to fire and EMS in Lake County?

The analog conventional channels can be heard on any scanner; a scanner that decodes DMR is needed for the digital conventional channels.

What are the control channels for trunked radio in Lake County?

For Lake County, start with the Northwest: TNDOC site of Tennessee Advanced Communications Network (TACN). Its control channels are 854.1375, 859.4375 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Lake County fire and EMS frequencies encrypted?

1 of the 3 conventional frequencies listed for Lake County are marked encrypted; a scanner cannot decode encrypted audio.