About Henning Fire and EMS Frequencies
Quick answer: Fire dispatch for Henning: Henning Fire 151.0775 MHz, DMR, CC 1 · TG 575 · SL 1. County-level ems dispatch that covers Henning: Lauderdale County EMS 155.6550 MHz, narrow FM, 225.7 PL.
- 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- 1 conventional channel uses a digital mode (DMR), which needs a scanner that decodes that mode.
Data updated .
Henning conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Henning Fire | Henning Fire – Dispatch | 151.0775 In 156.1425 | CC 1 · TG 575 · SL 1 | DMR | WQPW657 |
| Henning Fire | Henning Fire – Dispatch | 151.0775 In 156.1425 | 114.8 PL | FMN | WQPW657 |
Lauderdale County channels that also cover Henning
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Lauderdale County Fire | Lauderdale County Fire – Dispatch | 154.8000 In 158.9100 | 71.9 PL | FMN | WPMT941 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Lauderdale County EMS | Lauderdale County EMS – Dispatch | 155.6550 In 153.7400 | 225.7 PL | FMN | WQDC653 |
| Lauderdale County EMS | Rescue Squad | 462.9500 In 467.9500 | 186.2 PL | FMN | WQAU948 |
EMS Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Lauderdale County EMS | Lauderdale County EMS – Private | 159.1500 | 225.7 PL | FMN | WQDC653 |
Nearest trunked radio sites
Distances are measured from the center of Henning.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Henning?
Fire dispatch channels listed for Henning: Henning Fire 151.0775 MHz, DMR, CC 1 · TG 575 · SL 1.
What frequency does EMS or the ambulance service use in Henning?
We do not have a EMS dispatch channel listed specifically for Henning. The county-level EMS dispatch channels in the same county: Lauderdale County EMS 155.6550 MHz, narrow FM, 225.7 PL.
What scanner do I need to listen to fire and EMS in Henning?
The analog conventional channels can be heard on any scanner; a scanner that decodes DMR is needed for the digital conventional channels.
What are the control channels for trunked radio in Henning?
For Henning, start with the Ripley (700) site of Tennessee Advanced Communications Network (TACN). Its control channels are 769.83125, 771.33125, 773.28125 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Henning fire and EMS frequencies encrypted?
None of the 2 conventional frequencies listed for Henning are marked encrypted.