About Lawrence County Fire and EMS Frequencies
Quick answer: Fire dispatch for Lawrence County: Lawrence County Fire 154.3700 MHz, narrow FM, 100.0 PL. EMS dispatch for Lawrence County: Lawrence County EMS 155.4000 MHz, narrow FM, 100.0 PL.
- 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
Data updated .
Lawrence County conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Lawrence County Fire | Lawrence County Fire – Dispatch | 154.3700 In 150.7750 | 100.0 PL | FMN | WPYT524 |
| Lawrence County Fire | Lawrence County Fire – Dispatch | 155.1600 In 158.7450 | 156 DPL | FMN | KNGZ250 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Lawrence County EMS | Lawrence County EMS – Dispatch | 155.4000 | 100.0 PL | FMN | KUI551 |
Radio system sites in Lawrence County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Lawrence County
Common questions
What frequency does the fire department use in Lawrence County?
Fire dispatch channels listed for Lawrence County: Lawrence County Fire 154.3700 MHz, narrow FM, 100.0 PL.
What frequency does EMS or the ambulance service use in Lawrence County?
EMS dispatch channels listed for Lawrence County: Lawrence County EMS 155.4000 MHz, narrow FM, 100.0 PL.
What scanner do I need to listen to fire and EMS in Lawrence County?
The analog conventional channels can be heard on any scanner.
What are the control channels for trunked radio in Lawrence County?
For Lawrence County, start with the Crestview site of Tennessee Advanced Communications Network (TACN). Its control channels are 152.095, 152.115 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Lawrence County fire and EMS frequencies encrypted?
None of the 3 conventional frequencies listed for Lawrence County are marked encrypted.