About Loudon County Fire and EMS Frequencies
Quick answer: EMS dispatch for Loudon County: Loudon County EMS 462.9625 MHz, narrow FM, 754 DPL.
- 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
Data updated .
Loudon County conventional frequencies
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Loudon County Fire | County Fire/Rescue – Fireground/Backup | 453.6625 In 458.6625 | 167.9 PL | FMN | KFD604 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Loudon County EMS | Priority EMS – Dispatch | 462.9625 In 467.9625 | 754 DPL | FMN | WRHW422 |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Fort Loudoun Medical Center | Patient Reports | 463.0375 In 468.0375 | 226 DPL | FMN | KVJ892 |
Radio system sites in Loudon County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Loudon County
Common questions
What frequency does EMS or the ambulance service use in Loudon County?
EMS dispatch channels listed for Loudon County: Loudon County EMS 462.9625 MHz, narrow FM, 754 DPL.
What scanner do I need to listen to fire and EMS in Loudon County?
The analog conventional channels can be heard on any scanner.
What are the control channels for trunked radio in Loudon County?
For Loudon County, start with the Centerville site of Tennessee Advanced Communications Network (TACN). Its control channels are 770.35625, 771.28125 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Loudon County fire and EMS frequencies encrypted?
None of the 3 conventional frequencies listed for Loudon County are marked encrypted.