Skip to content

Macon County Fire and EMS Frequencies

Macon County in Tennessee has 5 countywide conventional frequencies and 0 countywide talkgroups in our database. Use the list of 2 cities and communities below for local fire departments and EMS agencies.

About Macon County Fire and EMS Frequencies

Quick answer: Fire dispatch for Macon County: Macon County Fire 154.3400 MHz, P25, NAC 297; Willette Fire 155.0925 MHz, narrow FM, 411 DPL. EMS dispatch for Macon County: Macon County EMS 155.3250 MHz, P25, NAC 911.

  • 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 2 conventional channels use a digital mode (P25), which needs a scanner that decodes that mode.

Data updated .

Macon County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Macon County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Macon County FireCounty Fire Paging154.3400
In 154.0100
NAC 297P25WQVU861
Willette FireWillette Fire Department155.0925
In 151.4075
411 DPLFMNWQVU861

EMS Dispatch

EMS Dispatch frequencies for Macon County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Macon County EMSMacon County EMS – Dispatch155.3250
In 150.7750
NAC 911P25WQVU861

EMS Tactical

EMS Tactical frequencies for Macon County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Macon County EMSEMS Operations155.2950503 DPLFMNKVM296
Macon County EMSEMS Operations Analog155.3250413 DPLFMNWQVU861

Radio system sites in Macon County

Program the control channel first; your scanner finds the voice channels from it.

Red Boiling Springs (*) · Tennessee Advanced Communications Network (TACN)
RFSS 2 · Site 56 (hex 38)
Control 851.375, 851.75
Voice 852.425, 852.7375, 852.9875, 853.7375
Ward Lane/Westmoreland (*) · Tennessee Advanced Communications Network (TACN)
RFSS 2 · Site 57 (hex 39)
Control 851.975, 852.225
Voice 852.6625, 852.9625, 853.45, 853.8125
LaFayette-Days Road (*) · Tennessee Advanced Communications Network (TACN)
RFSS 2 · Site 58 (hex 3A)
Control 851.45, 851.725
Voice 851.925, 852.2, 852.7, 853.0875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Macon County

Common questions

What frequency does the fire department use in Macon County?

Fire dispatch channels listed for Macon County: Macon County Fire 154.3400 MHz, P25, NAC 297; Willette Fire 155.0925 MHz, narrow FM, 411 DPL.

What frequency does EMS or the ambulance service use in Macon County?

EMS dispatch channels listed for Macon County: Macon County EMS 155.3250 MHz, P25, NAC 911.

What scanner do I need to listen to fire and EMS in Macon County?

The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels.

What are the control channels for trunked radio in Macon County?

For Macon County, start with the Red Boiling Springs (*) site of Tennessee Advanced Communications Network (TACN). Its control channels are 851.375, 851.75 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Macon County fire and EMS frequencies encrypted?

None of the 5 conventional frequencies listed for Macon County are marked encrypted.