Skip to content

McMinn County Fire and EMS Frequencies

McMinn County in Tennessee has 3 countywide conventional frequencies and 0 countywide talkgroups in our database. Use the list of 7 cities and communities below for local fire departments and EMS agencies.

About McMinn County Fire and EMS Frequencies

Quick answer: Fire dispatch for McMinn County: McMinn County Fire 453.5750 MHz, narrow FM, 162.2 PL. EMS dispatch for McMinn County: AMR EMS 453.1875 MHz, narrow FM, 162 DPL.

  • 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

McMinn County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for McMinn County
AgencyDescriptionFrequency (MHz)ToneModeFCC
McMinn County FireRural Fire/Rescue Squads – Dispatch453.5750
In 458.5750
162.2 PLFMNKQF655

Fire Ground / Tactical

Fire Ground / Tactical frequencies for McMinn County
AgencyDescriptionFrequency (MHz)ToneModeFCC
McMinn County FireRural Fire/Rescue Squads – Tactical453.5875162.2 PLFMNKD51286

EMS Dispatch

EMS Dispatch frequencies for McMinn County
AgencyDescriptionFrequency (MHz)ToneModeFCC
AMR EMSAMR EMS – Dispatch453.1875
In 458.1875
162 DPLFMNWQBQ391

Radio system sites in McMinn County

Program the control channel first; your scanner finds the voice channels from it.

Starr Mountain · Tennessee Advanced Communications Network (TACN)
RFSS 2 · Site 24 (hex 18) · NAC 2A0
Control 771.63125, 771.90625
Voice 772.28125, 772.88125, 773.30625, 773.95625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in McMinn County

Common questions

What frequency does the fire department use in McMinn County?

Fire dispatch channels listed for McMinn County: McMinn County Fire 453.5750 MHz, narrow FM, 162.2 PL.

What frequency does EMS or the ambulance service use in McMinn County?

EMS dispatch channels listed for McMinn County: AMR EMS 453.1875 MHz, narrow FM, 162 DPL.

What scanner do I need to listen to fire and EMS in McMinn County?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in McMinn County?

For McMinn County, start with the Starr Mountain site of Tennessee Advanced Communications Network (TACN). Its control channels are 771.63125, 771.90625 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are McMinn County fire and EMS frequencies encrypted?

None of the 3 conventional frequencies listed for McMinn County are marked encrypted.