About Oliver Springs Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Oliver Springs: Morgan County Fire 155.9400 MHz, narrow FM, 155 DPL. County-level ems dispatch that covers Oliver Springs: Morgan County EMS 151.4975 MHz, narrow FM, 043 DPL.
- 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
Data updated .
Morgan County channels that also cover Oliver Springs
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Morgan County Fire | Morgan County Fire – Dispatch | 155.9400 In 153.8000 | 155 DPL | FMN | WPGZ373 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Morgan County EMS | Morgan County EMS – Dispatch | 151.4975 In 156.0750 | 043 DPL | FMN | KNGD349 |
| Morgan County EMS | EMS/Rescue UHF | 453.3125 In 458.3125 | 043 DPL | FMN | KNGD349 |
Nearest trunked radio sites
Distances are measured from the center of Oliver Springs.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Oliver Springs?
We do not have a fire dispatch channel listed specifically for Oliver Springs. The county-level fire dispatch channels in the same county: Morgan County Fire 155.9400 MHz, narrow FM, 155 DPL.
What frequency does EMS or the ambulance service use in Oliver Springs?
We do not have a EMS dispatch channel listed specifically for Oliver Springs. The county-level EMS dispatch channels in the same county: Morgan County EMS 151.4975 MHz, narrow FM, 043 DPL.
What scanner do I need to listen to fire and EMS in Oliver Springs?
The analog conventional channels can be heard on any scanner.
What are the control channels for trunked radio in Oliver Springs?
For Oliver Springs, start with the Oak Ridge site of Tennessee Advanced Communications Network (TACN). Its control channels are 770.61875, 771.23125 MHz. Program a control channel first; the scanner finds the voice channels from it.