About Scott County Fire and EMS Frequencies
Quick answer: Fire dispatch for Scott County: Scott County Fire 154.2350 MHz, narrow FM, 110.9 PL. EMS dispatch for Scott County: Scott County EMS 155.3250 MHz, narrow FM, 100.0 PL.
- 10 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
Data updated .
Scott County conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Scott County Fire | Scott County Fire – Dispatch – Robbins (88.5 PL Input) | 154.2350 In 158.8650 | 110.9 PL | FMN | WQBU748 |
| Scott County Fire | Scott County Fire – Dispatch – Huntsville (79.7 PL Input) | 154.3250 In 158.8650 | 110.9 PL | FMN | WQBU748 |
| Scott County Fire | Scott County Fire – Dispatch – ONeida (69.3 PL Input) | 154.3250 In 158.8650 | 110.9 PL | FMN | WQBU748 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Scott County Fire | Fireground Operations | 154.3250 | 94.8 PL | FMN | WQBU748 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Scott County EMS | Scott County EMS – Dispatch – Huntsville (74.4 PL Input) | 155.3250 In 159.6900 | 100.0 PL | FMN | KZ2067 |
| Scott County EMS | Scott County EMS – Dispatch – ONeida (82.5 PL Input) | 155.3250 In 159.6900 | 100.0 PL | FMN | KZ2067 |
EMS Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Scott County EMS | Rescue Squad Direct | 155.1750 | 632 DPL | FMN | WQKY218 |
| Scott County EMS | EMS Direct | 155.3250 | 97.4 PL | FMN | — |
EMS Talk-around
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Scott County EMS | Rescue Squad | 155.1750 In 159.1200 | 654 DPL | FMN | WQKY218 |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| St. Mary's Medical Center | EMS Operations | 463.0125 In 468.0125 | FMN | WNYV338 |
Radio system sites in Scott County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Scott County
Common questions
What frequency does the fire department use in Scott County?
Fire dispatch channels listed for Scott County: Scott County Fire 154.2350 MHz, narrow FM, 110.9 PL.
What frequency does EMS or the ambulance service use in Scott County?
EMS dispatch channels listed for Scott County: Scott County EMS 155.3250 MHz, narrow FM, 100.0 PL.
What scanner do I need to listen to fire and EMS in Scott County?
The analog conventional channels can be heard on any scanner.
What are the control channels for trunked radio in Scott County?
For Scott County, start with the Black Creek (*) site of Tennessee Advanced Communications Network (TACN). Its control channels are 769.59375 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Scott County fire and EMS frequencies encrypted?
None of the 10 conventional frequencies listed for Scott County are marked encrypted.