About Stewart County Fire and EMS Frequencies
Quick answer: Fire dispatch for Stewart County: Stewart County Fire 154.3700 MHz, narrow FM, 82.5 PL. EMS dispatch for Stewart County: Stewart County EMS 460.0250 MHz, narrow FM, 127.3 PL.
- 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- 1 entry is marked expired, so it may no longer be in use.
Data updated .
Stewart County conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Stewart County Fire | Stewart County Fire – Dispatch | 154.3700 | 82.5 PL | FMN | — |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Stewart County EMS | Stewart County EMS – Backup to TRS | 460.0250 In 465.0250 | 127.3 PL | FMN | KFV803 |
EMS Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Stewart County EMS Expired: Expired 6/15 | Rescue Squad | 453.2750 In 458.2750 | FMN | WPQE249 |
Radio system sites in Stewart County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Stewart County
Common questions
What frequency does the fire department use in Stewart County?
Fire dispatch channels listed for Stewart County: Stewart County Fire 154.3700 MHz, narrow FM, 82.5 PL.
What frequency does EMS or the ambulance service use in Stewart County?
EMS dispatch channels listed for Stewart County: Stewart County EMS 460.0250 MHz, narrow FM, 127.3 PL.
What scanner do I need to listen to fire and EMS in Stewart County?
The analog conventional channels can be heard on any scanner.
What are the control channels for trunked radio in Stewart County?
For Stewart County, start with the Dover site of Tennessee Advanced Communications Network (TACN). Its control channels are 154.815, 155.445, 161.825 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Stewart County fire and EMS frequencies encrypted?
None of the 3 conventional frequencies listed for Stewart County are marked encrypted.