About Blountville Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Blountville: Sullivan County Fire 154.1300 MHz, narrow FM, 146.2 PL. County-level ems dispatch that covers Blountville: Sullivan County EMS 155.2800 MHz, narrow FM, no tone; Wellmont Health Systems (Bristol) 155.4000 MHz, narrow FM, 67.0 PL. Trunked: Tennessee Advanced Communications Network (TACN), for example TN - Sullivan Co-Public Safety talkgroup 30061 (hex 756d).
- 7 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Tennessee Advanced Communications Network (TACN): 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Blountville, start with the Sullivan Co Simulcast site of Tennessee Advanced Communications Network (TACN), about 7 miles away. Its control channels: 854.5625, 856.7375 MHz.
Data updated .
Blountville trunked talkgroups
Tennessee Advanced Communications Network (TACN)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| TN - Sullivan Co-Public Safety | Sullivan County Fire Operations (Blountville) | 30061 | 756d | D |
Sullivan County channels that also cover Blountville
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Sullivan County Fire | Avoca Fire . | 154.1300 | 146.2 PL | FMN | KJS691 |
| Sullivan County Fire | Sullivan County Fire – Dispatch – Lower End (Simulcast from TRS) | 154.4300 In 154.0700 | 167.9 PL | FMN | WXQ974 |
| Sullivan County Fire | Sullivan County Fire – Dispatch – Upper End (Simulcast from TRS) | 160.1550 In 156.0750 | 100.0 PL | FMN | WPKF662 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Sullivan County EMS | Sullivan County EMS – Dispatch (Countywide) | 155.2800 | FMN | KSU574 | |
| Wellmont Health Systems (Bristol) | Air Medical Dispatch . | 155.4000 | 67.0 PL | FMN | WNGG616 |
EMS Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Wellmont Health Systems (Bristol) | Wellmont Flight Control . | 462.9500 In 467.9500 | 82.5 PL | FMN | KWQ588 |
| Wellmont Health Systems (Bristol) | Bristol Reg Med Center – Operations | 464.0750 In 469.0750 | 023 DPL | FMN | WSJM583 |
Nearest trunked radio sites
Distances are measured from the center of Blountville.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Blountville?
We do not have a fire dispatch channel listed specifically for Blountville. The county-level fire dispatch channels in the same county: Sullivan County Fire 154.1300 MHz, narrow FM, 146.2 PL.
What frequency does EMS or the ambulance service use in Blountville?
We do not have a EMS dispatch channel listed specifically for Blountville. The county-level EMS dispatch channels in the same county: Sullivan County EMS 155.2800 MHz, narrow FM, no tone; Wellmont Health Systems (Bristol) 155.4000 MHz, narrow FM, 67.0 PL.
Do fire departments and EMS use a trunked radio system in Blountville?
Yes. Fire and EMS talkgroups are listed for Tennessee Advanced Communications Network (TACN): 1 talkgroup. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Blountville?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Blountville?
For Blountville, start with the Sullivan Co Simulcast site of Tennessee Advanced Communications Network (TACN). Its control channels are 854.5625, 856.7375 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Blountville fire and EMS talkgroups encrypted?
None of the 1 talkgroups listed for Blountville are marked encrypted.