About Wayne County Fire and EMS Frequencies
Quick answer: Fire dispatch for Wayne County: Wayne County Fire 453.2375 MHz, DMR, no tone. EMS dispatch for Wayne County: Air Evac Lifeteam EMS 152.8700 MHz, narrow FM, 364 DPL.
- 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
- 9 conventional channels use a digital mode (DMR), which needs a scanner that decodes that mode.
Data updated .
Wayne County conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Wayne County Fire | Wayne County Fire – Dispatch (Clifton Repeater) | 453.2375 In 458.2375 | DMR | WNQB228 | |
| Wayne County Fire | Wayne County Fire – Dispatch (Waynesboro/Highland Repeaters) | 453.2750 In 458.2750 | DMR | WNQB228 | |
| Wayne County Fire | Wayne County Fire – Dispatch (Cypress Inn Repeater) | 453.3375 In 458.3375 | DMR | WNQB228 | |
| Wayne County Fire | Wayne County Fire – Dispatch (Highlands Repeater) | 453.3875 In 458.3875 | CC 10 · TG * · SL * | DMR | WNQB228 |
| Wayne County Fire | Wayne County Fire – Dispatch (Lutts Repeater) | 453.4875 In 458.4875 | CC 11 · TG * · SL * | DMR | WNQB228 |
| Wayne County Fire | Wayne County Fire – Dispatch (Highlands Repeater) | 453.5375 In 458.5375 | CC 10 · TG * · SL * | DMR | WNQB228 |
| Wayne County Fire | Wayne County Fire – Dispatch (Cypress Inn Repeater) | 453.6125 In 458.6125 | CC 13 · TG * · SL 2 | DMR | WNQB228 |
| Wayne County Fire | Wayne County Fire – Dispatch (Lutts Repeater) | 453.7625 In 458.7625 | CC 11 · TG * · SL * | DMR | WNQB228 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Wayne County Fire | Southgate Fire (Waynesboro Repeater) | 453.1750 In 458.1750 | DMR | WNQB228 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Air Evac Lifeteam EMS | Air Evac Lifeteam EMS – Dispatch (Air Evac Lifeteam 72) | 152.8700 In 159.8550 | 364 DPL | FMN | WQJQ331 |
Radio system sites in Wayne County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Wayne County
Common questions
What frequency does the fire department use in Wayne County?
Fire dispatch channels listed for Wayne County: Wayne County Fire 453.2375 MHz, DMR, no tone.
What frequency does EMS or the ambulance service use in Wayne County?
EMS dispatch channels listed for Wayne County: Air Evac Lifeteam EMS 152.8700 MHz, narrow FM, 364 DPL.
What scanner do I need to listen to fire and EMS in Wayne County?
The analog conventional channels can be heard on any scanner; a scanner that decodes DMR is needed for the digital conventional channels.
What are the control channels for trunked radio in Wayne County?
For Wayne County, start with the Clifton: TNDOC site of Tennessee Advanced Communications Network (TACN). Its control channels are 853.1, 853.9875 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Wayne County fire and EMS frequencies encrypted?
None of the 10 conventional frequencies listed for Wayne County are marked encrypted.