Skip to content

Elkhart Fire and EMS Frequencies

Elkhart in Anderson County, Texas has 1 conventional frequency and 0 trunked talkgroups listed for local fire and EMS agencies. The closest trunked radio site we have is Crockett (Texas Wide Area Radio Network (TxWARN)), about 24 miles away.

About Elkhart Fire and EMS Frequencies

Quick answer: Fire dispatch for Elkhart: Elkhart Fire 158.8350 MHz, narrow FM, 179.9 PL. County-level ems dispatch that covers Elkhart: Anderson County EMS 452.8000 MHz, narrow FM, 464 DPL.

  • 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Elkhart conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Elkhart
AgencyDescriptionFrequency (MHz)ToneModeFCC
Elkhart FireFire/Police Dispatch158.8350
In 153.8750
179.9 PLFMNKRA427

Anderson County channels that also cover Elkhart

Fire Dispatch

Fire Dispatch frequencies for Anderson County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Anderson County FireAnderson County Fire – Dispatch154.3100
In 153.9500
179.9 PLFMNWNBX373

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Anderson County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Anderson County FireNorth Tactical155.8275
In 153.7625
179.9 PLFMNWPNY266
Anderson County FireSouth Tactical156.2175
In 154.0325
179.9 PLFMNWPNY266

EMS Dispatch

EMS Dispatch frequencies for Anderson County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Anderson County EMSChristus EMS Palestine Repeater452.8000
In 457.8000
464 DPLFMNWPTY451

Nearest trunked radio sites

Distances are measured from the center of Elkhart.

Crockett · Texas Wide Area Radio Network (TxWARN)
RFSS 2 · Site 36 (hex 24) · about 24 mi away
Control 771.80625, 772.25625
Voice 770.08125, 770.50625, 771.25625, 771.53125
Rusk · Texas Wide Area Radio Network (TxWARN)
RFSS 2 · Site 34 (hex 22) · about 29 mi away
Control 855.7125, 857.4875
Voice 855.4875, 855.9625, 856.4625, 856.9875
Larue · Henderson County P25
Project 25 · RFSS 3 · Site 3 (hex 3) · NAC 003 · about 35 mi away
Control 769.11875, 772.05625, 772.98125, 774.21875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Elkhart?

Fire dispatch channels listed for Elkhart: Elkhart Fire 158.8350 MHz, narrow FM, 179.9 PL.

What frequency does EMS or the ambulance service use in Elkhart?

We do not have a EMS dispatch channel listed specifically for Elkhart. The county-level EMS dispatch channels in the same county: Anderson County EMS 452.8000 MHz, narrow FM, 464 DPL.

What scanner do I need to listen to fire and EMS in Elkhart?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Elkhart?

For Elkhart, start with the Crockett site of Texas Wide Area Radio Network (TxWARN). Its control channels are 771.80625, 772.25625 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Elkhart fire and EMS frequencies encrypted?

None of the 1 conventional frequencies listed for Elkhart are marked encrypted.