About South Frydek Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers South Frydek: Austin County Fire 154.3250 MHz, FM, 107.2 PL. Trunked: Texas Wide Area Radio Network (TxWARN), for example Austin County Fire talkgroup 2305 (hex 901).
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Texas Wide Area Radio Network (TxWARN): 7 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For South Frydek, start with the Wallis site of Texas Wide Area Radio Network (TxWARN), about 6 miles away. Its control channels: 772.46875, 772.84375 MHz.
Data updated .
Austin County channels that also cover South Frydek
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Austin County Fire | Fire/EMS Primary (except Bellville) | 154.3250 In 156.0750 | 107.2 PL | FM | WPMR424 |
EMS Talk-around
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Austin County EMS | EMS Talkaround (Channel 8) | 158.8650 | 107.2 PL | FM | KB94611 |
Texas Wide Area Radio Network (TxWARN)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Austin County Fire | Austin County Fire – Dispatch | 2305 | 901 | D |
| Austin County Fire | Austin County Fire – Tactical Channel | 2244 | 8c4 | D |
| Austin County Fire | Austin County Fire – Tactical Channel | 2245 | 8c5 | D |
| Austin County Fire | Austin County Fire – Tactical Channel | 2306 | 902 | D |
| Austin County EMS | Austin County EMS – Dispatch | 2308 | 904 | D |
| Austin County EMS | Austin County EMS – Tactical Channel | 2309 | 905 | D |
| Austin County EMS | EMS Supervisors | 1231 | 4cf | D |
Nearest trunked radio sites
Distances are measured from the center of South Frydek.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in South Frydek?
We do not have a fire dispatch channel listed specifically for South Frydek. The county-level fire dispatch channels in the same county: Austin County Fire 154.3250 MHz, FM, 107.2 PL.
Do fire departments and EMS use a trunked radio system in South Frydek?
Yes. The county-level systems that cover South Frydek are Fire and EMS talkgroups are listed for Texas Wide Area Radio Network (TxWARN): 7 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in South Frydek?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in South Frydek?
For South Frydek, start with the Wallis site of Texas Wide Area Radio Network (TxWARN). Its control channels are 772.46875, 772.84375 MHz. Program a control channel first; the scanner finds the voice channels from it.