Skip to content

Road Runner Fire and EMS Frequencies

We do not have frequencies listed specifically for Road Runner in Cooke County, Texas yet. Countywide channels for Cooke County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Gainesville (Denton County Regional Radio System), about 9 miles away.

About Road Runner Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Road Runner: Cooke County Fire 154.3925 MHz, P25, NAC 395. County-level ems dispatch that covers Road Runner: Cooke County EMS 462.9500 MHz, narrow FM, 179.9 PL. Trunked: Denton County Regional Radio System, for example Cooke County Fire talkgroup 15006 (hex 3a9e).

  • 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 1 conventional channel uses a digital mode (P25), which needs a scanner that decodes that mode.
  • Trunked radio systems that carry fire and EMS traffic here: Denton County Regional Radio System: 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Road Runner, start with the Gainesville site of Denton County Regional Radio System, about 9 miles away. Its control channels: 772.35625, 774.18125 MHz.

Data updated .

Cooke County channels that also cover Road Runner

Fire Dispatch

Fire Dispatch frequencies for Cooke County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Cooke County FireCooke County Fire – Dispatch154.3925
In 150.7900
NAC 395P25WPKV449

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Cooke County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Cooke County FireCooke County Fire – Fire Ground154.3100CSQFMN—

EMS Dispatch

EMS Dispatch frequencies for Cooke County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Cooke County EMSCooke County EMS – Dispatch462.9500
In 467.9500
179.9 PLFMNKNAE663

EMS Tactical

EMS Tactical frequencies for Cooke County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Cooke County EMSEMS Response155.5650
In 153.7400
107.2 PLFMNKNAE663

Hospitals & Medical

Hospitals & Medical frequencies for Cooke County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Gainesville Memorial HospitalGainesville Memorial Hospital464.6375
In 469.6375
250.3 PLFMNWPYI487
Gainesville Memorial HospitalGainesville Memorial Hospital464.7125
In 469.7125
FMNWPYI487

Denton County Regional Radio System

Denton County Regional Radio System talkgroups
AgencyDescriptionTalkgroupHexMode
Cooke County FireCooke County Fire – Dispatch150063a9eT
Cooke County EMSCooke County EMS – Dispatch150043a9cT

Nearest trunked radio sites

Distances are measured from the center of Road Runner.

Gainesville · Denton County Regional Radio System
RFSS 1 · Site 5 (hex 5) · NAC 690 · about 9 mi away
Control 772.35625, 774.18125
Voice 771.00625
Cooke Northeast · Denton County Regional Radio System
RFSS 1 · Site 7 (hex 7) · NAC 690 · about 17 mi away
Control 771.55625, 772.93125
Voice 769.08125
Muenster · Denton County Regional Radio System
RFSS 1 · Site 4 (hex 4) · NAC 690 · about 19 mi away
Control 772.68125, 774.49375
Voice 771.25625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Road Runner?

We do not have a fire dispatch channel listed specifically for Road Runner. The county-level fire dispatch channels in the same county: Cooke County Fire 154.3925 MHz, P25, NAC 395.

What frequency does EMS or the ambulance service use in Road Runner?

We do not have a EMS dispatch channel listed specifically for Road Runner. The county-level EMS dispatch channels in the same county: Cooke County EMS 462.9500 MHz, narrow FM, 179.9 PL.

Do fire departments and EMS use a trunked radio system in Road Runner?

Yes. The county-level systems that cover Road Runner are Fire and EMS talkgroups are listed for Denton County Regional Radio System: 2 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Road Runner?

The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Road Runner?

For Road Runner, start with the Gainesville site of Denton County Regional Radio System. Its control channels are 772.35625, 774.18125 MHz. Program a control channel first; the scanner finds the voice channels from it.