Skip to content

Bells Fire and EMS Frequencies

Bells in Grayson County, Texas has 1 conventional frequency and 0 trunked talkgroups listed for local fire and EMS agencies. The closest trunked radio site we have is Denison Simulcast (Denison P25), about 12 miles away.

About Bells Fire and EMS Frequencies

Quick answer: Fire dispatch for Bells: Bells FD Fire 154.2350 MHz, narrow FM, 167.9 PL.

  • 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 2 conventional channels use a digital mode (P25), which needs a scanner that decodes that mode.
  • 1 listed entry is marked encrypted. No scanner can decode encrypted audio.

Data updated .

Bells conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Bells
AgencyDescriptionFrequency (MHz)ToneModeFCC
Bells FD FireBells Volunteer Fire Department154.2350
In 155.7300
167.9 PLFMNKNJT950

Grayson County channels that also cover Bells

Fire Dispatch

Fire Dispatch frequencies for Grayson County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Grayson County FireGrayson County Fire – Dispatch154.7850
In 155.8500
NAC 179P25KNFL698
Howe City Services FireHowe Police Department / Fire Department / City sevices155.8200
In 154.9800
156.7 PLFMNWPWZ469
Locust VFD FireLocust Volunteer Fire Department Fire – Dispatch154.4000
In 159.1800
118.8 PLFMNWPPW515
Pottsboro PD / FD FirePottsboro Police Department / Fire Department Fire – Dispatch158.8950CSQFMN—
Preston Volunteer Emergency ServicesFire/EMS Dispatch155.8125
In 153.9875
110.9 PLFMNWPVY660
Van Alstyne Fire & PoliceVan Alstyne Fire & Police – Dispatch771.0563
In 801.0563
NAC 091P25 EncryptedWRNM609

Nearest trunked radio sites

Distances are measured from the center of Bells.

Denison Simulcast · Denison P25
Project 25 · RFSS 1 · Site 1 (hex 1) · NAC C81 · about 12 mi away
Control 772.75625, 773.88125, 774.88125
Voice 771.68125
NCTCOG Collin · Dallas P25 / NCTCOG
Project 25 · RFSS 1 · Site 21 (hex 15) · NAC 370 · about 29 mi away
Control 769.56875, 770.35625, 770.60625
Voice 769.31875
McKinney Simulcast · McKinney
RFSS 1 · Site 1 (hex 1) · NAC 380 · about 31 mi away
Control 856.3625, 857.3625, 858.3625, 859.3625
Voice 854.2625, 854.7375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Bells?

Fire dispatch channels listed for Bells: Bells FD Fire 154.2350 MHz, narrow FM, 167.9 PL.

What scanner do I need to listen to fire and EMS in Bells?

The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels.

What are the control channels for trunked radio in Bells?

For Bells, start with the Denison Simulcast site of Denison P25. Its control channels are 772.75625, 773.88125, 774.88125 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Bells fire and EMS frequencies encrypted?

None of the 1 conventional frequencies listed for Bells are marked encrypted.