About Pinebrook Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Pinebrook: Grimes County Fire 154.3250 MHz, narrow FM, 79.7 PL. County-level ems dispatch that covers Pinebrook: Grimes County EMS 151.4975 MHz, narrow FM, 134 DPL. Trunked: Texas Wide Area Radio Network (TxWARN), for example Grimes County Fire talkgroup 2573 (hex a0d).
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Texas Wide Area Radio Network (TxWARN): 5 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Pinebrook, start with the Navasota site of Texas Wide Area Radio Network (TxWARN), about 12 miles away. Its control channels: 853.4375 MHz.
Data updated .
Grimes County channels that also cover Pinebrook
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Grimes County Fire | Grimes County Fire – Dispatch | 154.3250 In 156.0450 | 79.7 PL | FMN | WPVR897 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Grimes County EMS | St. Joseph's Hospital Ambulance Service | 151.4975 In 150.7900 | 134 DPL | FMN | WQPA545 |
Texas Wide Area Radio Network (TxWARN)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Grimes County Fire | Grimes County Fire – Dispatch (patch to 154.325 MHz) | 2573 | a0d | D |
| Grimes County Fire | Grimes County Fire – Tactical Channel | 2574 | a0e | D |
| Grimes County EMS | Grimes County EMS – Dispatch | 2575 | a0f | D |
| Grimes County EMS | Roads | 2576 | a10 | D |
| Grimes County EMS | EMS First Responders | 2577 | a11 | D |
Nearest trunked radio sites
Distances are measured from the center of Pinebrook.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Pinebrook?
We do not have a fire dispatch channel listed specifically for Pinebrook. The county-level fire dispatch channels in the same county: Grimes County Fire 154.3250 MHz, narrow FM, 79.7 PL.
What frequency does EMS or the ambulance service use in Pinebrook?
We do not have a EMS dispatch channel listed specifically for Pinebrook. The county-level EMS dispatch channels in the same county: Grimes County EMS 151.4975 MHz, narrow FM, 134 DPL.
Do fire departments and EMS use a trunked radio system in Pinebrook?
Yes. The county-level systems that cover Pinebrook are Fire and EMS talkgroups are listed for Texas Wide Area Radio Network (TxWARN): 5 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Pinebrook?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Pinebrook?
For Pinebrook, start with the Navasota site of Texas Wide Area Radio Network (TxWARN). Its control channels are 853.4375 MHz. Program a control channel first; the scanner finds the voice channels from it.