Skip to content

Belterra Fire and EMS Frequencies

We do not have frequencies listed specifically for Belterra in Hays County, Texas yet. Countywide channels for Hays County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Davis IR (Greater Austin/Travis Regional Radio System (GATRRS)), about 9 miles away.

About Belterra Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Belterra: Hays County Fire 154.0100 MHz, narrow FM, 151.4 PL. Trunked: Greater Austin/Travis Regional Radio System (GATRRS), for example Hays County Hospital talkgroup 1241 (hex 4d9).

  • 7 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Greater Austin/Travis Regional Radio System (GATRRS): 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Belterra, start with the Davis IR site of Greater Austin/Travis Regional Radio System (GATRRS), about 9 miles away. Its control channels: 852.1375 MHz.

Data updated .

Hays County channels that also cover Belterra

Fire Dispatch

Fire Dispatch frequencies for Hays County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Hays County FireWimberley Volunteer Fire Department Dispatch154.0100
In 154.3400
151.4 PLFMNWPVV925
Hays County FireNorth Hays Fire Operations
Patched to LCRA 5562
154.2500
In 159.0450
127.3 PLFMNWPBG523
Hays County FireSouth Dispatch
Patched to LCRA
154.3550
In 153.8900
351 DPLFMNWNAG548
Hays County FireEast Dispatch
Patched to LCRA
154.3850
In 153.7700
151.4 PLFMNWQU379
Hays County FireNorth Hays Fire Alarm
Patched to LCRA 5561
154.9950
In 158.8800
151.4 PLFMNWPMN437
Hays County FireWimberley Fire/EMS Dispatch
Patched to LCRA
155.8950
In 153.8750
151.4 PLFMNKGU911

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Hays County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Hays County FireFire Marshals855.7375
In 810.7375
023 DPLFMWNPA614

Greater Austin/Travis Regional Radio System (GATRRS)

Greater Austin/Travis Regional Radio System (GATRRS) talkgroups
AgencyDescriptionTalkgroupHexMode
Hays County HospitalEMS to Seton Hays County Hospital12414d9D
Hays County HospitalEMS to Seton Hays County Hospital5500157cD

Nearest trunked radio sites

Distances are measured from the center of Belterra.

Davis IR · Greater Austin/Travis Regional Radio System (GATRRS)
RFSS 2 · Site 1 (hex 1) · about 9 mi away
Control 852.1375
Voice 851.2625, 851.6125, 851.8625, 852.775
Central Austin · Greater Austin/Travis Regional Radio System (GATRRS)
RFSS 1 · Site 10 (hex A) · about 16 mi away
Control 769.21875, 769.45625, 769.91875
Voice 769.68125, 770.14375, 770.40625
Austin Travis · Greater Austin/Travis Regional Radio System (GATRRS)
RFSS 1 · Site 7 (hex 7) · NAC 137 · about 16 mi away
Control 851.1375, 851.2875, 851.3125, 851.3875
Voice 851.0375, 851.0625, 851.5625, 851.5875, 851.7375, 851.8125, 851.8375, 852.0875, 852.1625, 852.1875, 852.4125, 852.6, 852.6125, 852.6375, 852.6875, 852.85, 852.95, 853.05, 853.1, 853.1625, 853.275, 853.325, 853.3625, 853.55, 853.575, 853.825, 853.85, 855.2375, 855.7125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Belterra?

We do not have a fire dispatch channel listed specifically for Belterra. The county-level fire dispatch channels in the same county: Hays County Fire 154.0100 MHz, narrow FM, 151.4 PL.

Do fire departments and EMS use a trunked radio system in Belterra?

Yes. The county-level systems that cover Belterra are Fire and EMS talkgroups are listed for Greater Austin/Travis Regional Radio System (GATRRS): 2 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Belterra?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Belterra?

For Belterra, start with the Davis IR site of Greater Austin/Travis Regional Radio System (GATRRS). Its control channels are 852.1375 MHz. Program a control channel first; the scanner finds the voice channels from it.