About Whitney Fire and EMS Frequencies
Quick answer: Fire dispatch for Whitney: Whitney Fire 154.1000 MHz, narrow FM, 051 DPL. County-level ems dispatch that covers Whitney: Hill County EMS 460.3875 MHz, narrow FM, 192.8 PL. Trunked: Hill County, for example Hill County Fire talkgroup 41200 (hex a0f0).
- 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Hill County: 13 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Whitney, start with the Laguna Park site of Hill County, about 7 miles away. Its control channels: 854.0875, 856.0375, 857.0375 MHz.
Data updated .
Whitney conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Whitney Fire | Whitney Fire | 154.1000 | 051 DPL | FMN | KNJF429 |
Hill County channels that also cover Whitney
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Hill County Fire | County Fire Dispatch (new) | 154.0475 In 158.9700 | 532 DPL | FMN | WQIB690 |
| Hill County Fire | County Fire / EMS | 154.2950 In 153.8300 | 100.0 PL | FMN | WPCH495 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Hill County EMS | Careflight Ground Ambulance | 460.3875 In 465.3875 | 192.8 PL | FMN | WQLE331 |
Hill County
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Hill County Fire | Hill County Fire – Dispatch | 41200 | a0f0 | T |
| Hill County Fire | Hill County Fire – Dispatch | 41201 | a0f1 | T |
| Hill County Fire | Hill County Fire – Fire Ground | 41202 | a0f2 | T |
| Hill County Fire | Hill County Fire – Fire Ground | 41203 | a0f3 | T |
| Hill County Fire | Hill County Fire – Fire Ground | 41204 | a0f4 | T |
| Hill County Fire | Fire Training West | 41207 | a0f7 | T |
| Hill County Fire | Fire Training East | 41208 | a0f8 | T |
| Hill County Fire | Fire Training | 41209 | a0f9 | T |
| Hill County Fire | Fire Events | 41210 | a0fa | T |
| Hill County Fire | Fire Events | 41211 | a0fb | T |
| Hill County Fire | Fire TT | 41205 | a0f5 | T |
| Hill County Fire | Fire Talkaround | 41206 | a0f6 | T |
| Hill County Fire | Careflite Ground | 41300 | a154 | T |
Nearest trunked radio sites
Distances are measured from the center of Whitney.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Whitney?
Fire dispatch channels listed for Whitney: Whitney Fire 154.1000 MHz, narrow FM, 051 DPL.
What frequency does EMS or the ambulance service use in Whitney?
We do not have a EMS dispatch channel listed specifically for Whitney. The county-level EMS dispatch channels in the same county: Hill County EMS 460.3875 MHz, narrow FM, 192.8 PL.
Do fire departments and EMS use a trunked radio system in Whitney?
Yes. The county-level systems that cover Whitney are Fire and EMS talkgroups are listed for Hill County: 13 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Whitney?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Whitney?
For Whitney, start with the Laguna Park site of Hill County. Its control channels are 854.0875, 856.0375, 857.0375, 858.0875 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Whitney fire and EMS frequencies encrypted?
None of the 1 conventional frequencies listed for Whitney are marked encrypted.