About Valentine Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Valentine: Jeff Davis County Fire 155.5725 MHz, narrow FM, 192.8 PL.
- 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- 1 conventional channel uses a digital mode (P25), which needs a scanner that decodes that mode.
Data updated .
Jeff Davis County channels that also cover Valentine
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Jeff Davis County Fire | Sheriff, Fire, EMS – Mt. Livermore (West) | 155.5725 | 192.8 PL | FMN | WQFB720 |
| Jeff Davis County Fire | Sheriff, Fire, EMS – Carpenter Mtn. (Northeast) | 155.6775 | 192.8 PL | FMN | WQFB720 |
| Jeff Davis County Fire | Sheriff, Fire, EMS – Apache Mtn (Central) | 155.8725 | 192.8 PL | FMN | WQFB720 |
| Jeff Davis County Fire | Sheriff, Fire, EMS – Ft. Davis (Southeast) | 155.9925 | 192.8 PL | FMN | WQFB720 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Jeff Davis County Fire | Cherry Creek Volunteer Fire Department Tactical | 154.1000 In 158.8500 | NAC 122 | P25 | WSCV948 |
| Jeff Davis County Fire | Cherry Creek Volunteer Fire Department Tactical | 154.1000 In 158.8500 | 192.8 PL | FMN | WSCV948 |
Nearest trunked radio sites
Distances are measured from the center of Valentine.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Valentine?
We do not have a fire dispatch channel listed specifically for Valentine. The county-level fire dispatch channels in the same county: Jeff Davis County Fire 155.5725 MHz, narrow FM, 192.8 PL.
What scanner do I need to listen to fire and EMS in Valentine?
The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels.
What are the control channels for trunked radio in Valentine?
For Valentine, start with the Gomez Peak site of Greater Austin/Travis Regional Radio System (GATRRS). Its control channels are 152.5775, 154.3325 MHz. Program a control channel first; the scanner finds the voice channels from it.