About Richland Springs Fire and EMS Frequencies
Quick answer: Fire dispatch for Richland Springs: Richland Springs Fire 158.9250 MHz, narrow FM, no tone.
- 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
Data updated .
Richland Springs conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Richland Springs Fire | Vol. Fire Primary | 158.9250 In 153.8000 | FMN | WPKE650 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Richland Springs Fire | Vol. Fire Tactical | 154.1900 | FMN | WPKE650 |
San Saba County channels that also cover Richland Springs
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| San Saba County Fire | Fire/EMS Primary | 158.8350 In 153.9125 | 162.2 PL | FMN | WQEV991 |
Nearest trunked radio sites
Distances are measured from the center of Richland Springs.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Richland Springs?
Fire dispatch channels listed for Richland Springs: Richland Springs Fire 158.9250 MHz, narrow FM, no tone.
What scanner do I need to listen to fire and EMS in Richland Springs?
The analog conventional channels can be heard on any scanner.
What are the control channels for trunked radio in Richland Springs?
For Richland Springs, start with the Llano North site of Greater Austin/Travis Regional Radio System (GATRRS). Its control channels are 152.1125, 152.7125 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Richland Springs fire and EMS frequencies encrypted?
None of the 2 conventional frequencies listed for Richland Springs are marked encrypted.